| Model | KV-ML16V | |||
| Type | Positioning/Motion unit | |||
| Number of control axes | 16 axes (total including a virtual axis) | |||
| Built-in device | [16 axes in use] Relay: 2,688 points (168 ch), Data memory: 222 words (high speed) /1,242 words (simple) [8 axes in use] Relay: 1,644 points (104 ch), Data memory: 222 words (high speed) /762 words (simple) [4 axes in use] Relay: 1,152 points (72 ch), Data memory: 222 words (high speed) /522 words (simple) | |||
| Output format | MECHATROLINK-II | |||
| Connectable CPU units | KV-5500/5000/3000 | |||
| Max. output pulse | – | |||
| Control mode | Position control, Torque control, Speed control, ML-II command, I/O control | |||
| Control period | 0.5 ms (up to 2 axes), 1.0 ms (up to 4 axes), 1.5 ms (up to 6 axes), 2.0 ms (up to 8 axes), 2.5 ms (up to 12 axes), 3.0 ms (up to 16 axes) | |||
| External interface | Input: Photocoupler input, Output: Open collector output (30 VDC 50 mA) MECHATROLINK-II port | |||
| Input time constant | Each input is set in 11 stages for each block | |||
| Axis control function execution method | Ladder program, motion flow | |||
| Motion flow | Program capacity | 768 KB | ||
| Max. number of blocks | A total of 256 blocks in all flows | |||
| Max. number of flows | 32 | |||
| Number of simultaneous activities | Number of connectable axes × 2 | |||
| Position unit | mm, deg (angle), PLS (pulse count), decimal point position from 0 to 9 digits, unit conversion function available | |||
| Cumulative address | -2,147,483,648 to +2,147,483,647 instruction units | |||
| Positioning control | Positioning mode | Absolute value/relative value | ||
| Position setting range | -2,147,483,648 to +2,147,483,647 instruction units | |||
| Interpolation | Straight-line interpolation (up to 16 axes), arc interpolation, helical interpolation | |||
| Single operation address | -2,147,483,648 to +2,147,483,647 instruction units | |||
| Acceleration/deceleration curve | Straight-line, SIN, Bezier | |||
| Acceleration/deceleration time | 0 to 65,535 ms | |||
| Start-up time | Independent/interpolation: 2 to 3 control periods (When the 1st axis is activated) Cache start: 1 to 2 control periods | |||
| M-code | 1 to 65,000, WITH/AFTER mode | |||
| Sensor positioning | External input – based switching control from speed to position | |||
| Number of points | 800 points/axis | |||
| Synchronisation control | Input | Counter (KV-MX1 required), instruction coordinates, current coordinates (KV-ML16V only) | ||
| Clutch | Select from direct, slide, and follow-up | |||
| Cam | Resolution: 2,048 to 32,768, Amount of data: 4 to 64 (Number changes according to the resolution) | |||
| Contact output | 16 points (including 8 external output points) × 2 | |||
| Correction during operation | Correction via auxiliary input, phase correction, and lead angle correction | |||
| Fine control | Fine data work area | 8 MB | ||
| Built-in ROM capacity | 512 KB | |||
| Number of settings | Built-in ROM: 100, SD memory card: 1000 | |||
| Data capacity of one setting | Built-in ROM: 512 KB, SD memory card: 8 MB (KV-MX1 is required) | |||
| Origin return | Origin return method | Origin sensor edge/midpoint, push origin return, Dog type (“With Z phase” or “Without Z phase” can be selected) | ||
| Speed control | Speed instruction range | -100,000 to 100,000 (× 0.01 min-1) | ||
| Torque control | Torque instruction range | -80,000 to 80,000 (× 0.01 %) | ||
| JOG/inching | Inching (The number of pulses can be specified), JOG (high speed/low speed) | |||
| Teaching | Current coordinate teaching and teaching from the counter current value are supported | |||
| Memory data | Point parameters 800 points (each axis), synchronisation parameters (each axis), fine setting (built-in ROM: 512 KB, expandable with a SD card), cam data motion flow setting, etc. can be read and written during RUN (with some restrictions) | |||
| High-speed counter | When KV-MX1 is connected: INC 4 ch/ABS Grey, residual Grey, binary 2 ch (switched, based on settings), Max. 6.4 MHz (2-phase, 4 multiplication) | |||
| 5-V power output | – | |||
| Output display | Error status/MECHATROLINK-II communication status | |||
| Self-diagnosis function | Diagnosis can be made through hardware error, various parameter errors, error number, and error messages | |||
| Parameter setting | Parameters can be set from KV-HPD1, “KV STUDIO,” and ladder programs | |||
| Data backup | Coordinates and error/warning history backup, parameter settings backup via flash ROM, 100,000 times switching | |||
| Internal current consumption | Main unit: 200 mA or less, external I/O: 120 mA or less | |||
| Weight | Approx. 220 g | |||
Keyence KV-ML16V
Khối chuyển động định vị tương thích ML 2 16 trục
SKU: KV-ML16V
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: hóa đơn VAT
Dịch vụ kèm theo:
✓ Lập trình & Sửa chữa PLC Keyence theo yêu cầu
✓ Lắp đặt & vận hành tận nơi
✓ Hỗ trợ kỹ thuật trọn đời
✓ Lập trình & Sửa chữa PLC Keyence theo yêu cầu
✓ Lắp đặt & vận hành tận nơi
✓ Hỗ trợ kỹ thuật trọn đời
Thông tin bổ sung
| Thương hiệu | |
|---|---|
| Thời gian bảo hành | 1 Năm |
| Series | |
| Yêu cầu tư vấn | 0342 678 887(Call/Zalo) |
Khu vực Miền Nam
Call: 0345 177 768 / Chat Zalo 
Khu vực Miền Bắc
Call: 0384 988 968 / Chat Zalo
Khu vực Miền Trung
Call: 0374 687 899/ Chat Zalo
Dịch vụ kỹ thuật/Bảo hành
Call: 0348 957 778/ Chat Zalo
Email liên hệ
