khối giao tiếp Keyence DL-EN1

Model		DL-EN1
Ethernetspecifications	Compliant standards	IEEE802.3u (100BASE-TX)
	Transmission speed	100Mbps (100BASE-TX)
	Transmission interface	STP cable or Category 5 or higher UTP cable (100BASE-TX)
	Maximum cable length	100 m (Distance between DL-EN1 and Ethernet switch)
Performancespecifications	Socket communication,no-protocol commands,ASCII	TCP socket 1Port number can be set between 1 and 655358500: Reserved for the systemInitial value: 64000
Sensorconnectionspecifications	Connectablesensors	Sensor amplifiers with D-bus support^*1
	Number ofconnectablesensor units	15 units max^*2
Indicator lamps		Link/activity indicator (LINK/ACT): Green LEDModule status indicator (MS): 2-colour (green/red) LEDNetwork status indicator (NS): 2-colour (green/red) LEDSensor communication indicator (D-bus): 2-colour (green/red) LED
Power voltage		20 to 30 VDC ±10%, including ripple (p-p)10%(supplied from the connected sensor amplifiers)
Power consumption		1500 mW or less (at 30 V 50 mA max)
Environmental resistance	Pollution degree	2
	Ambient temperature	-20 to +55 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material		Main unit case: Polycarbonate
Weight		Approx. 70 g
^1 “D-bus” is the name of KEYENCE’s wiring-saving system for sensor amplifiers.^2 Varies with the sensor amplifiers connected.

Thông tin bổ sung