| Model | KV-FL20 | 
| Current consumption | 80mA Max | 
| Power voltage | 24 VDC ± 10% (supplied by the CPU unit) | 
| Operating ambient temperature | 0 to +50°C (no freezing) | 
| Operating ambient humidity | 35 to 85%RH(no condensation) | 
| Ambient temperature for storage | -20 to +70°C | 
| Operating environment | Minimal amount of dust and corrosive gas present | 
| Noise immunity | 1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61000, 4-2/3/4/6)*1 | 
| Withstand voltage | 1,500 VAC for 1 minute | 
| Intermittent vibration | Frequency: 10 to 57 Hz, Amplitude: 0.075 mm*2 Frequency: 57 to 150 Hz, Acceleration: 9.8 m/s2*2 | 
| Continuous vibration | Frequency: 10 to 57 Hz, Amplitude: 0.035 mm*2 Frequency: 57 to 150 Hz, Acceleration: 4.9 m/s2*2 | 
| Transmission rate | 10 Mbps (10BASE-T), 100 Mbps (10BASE-TX) | 
| Transmission method | Baseband | 
| Connection | Conforms to IEEE802.3 (conforms to CSMA/CD) | 
| Transmission protocol | UDP/IP FA link protocol | 
| Maximum cable length | 100m*3 | 
| Maximum number of nodes | 254 | 
| Amount of cyclic data | Maximum (8,000 bits + 8,000 words), system maximum (8,000 bits + 8,000 words), node | 
| Message data amount | 1,024 bytes maximum | 
| Token frequency time | 50 ms/32 nodes (when there are 2,000 bits + 2,000 words for all nodes) | 
| Message transmission time | 500 ms (1:1 one-direction message arrival time) | 
| Token holding time | 1.56 ms (when area 1 has 4 words and area 2 has 64 words) | 
| Normal refresh region (Common memory area) | Bit region (relay): 8,000 bits (512 words) Word region (data memory): 8,000 words*4 | 
| High-speed refresh region (Common memory area) | Bit region (relay): – Word region (data memory): 100 words*4 | 
| Status memory area | Bit region (relay): 32 bits (2 words) Word region (data memory): 200 words | 
| Message region (transient region) | Bit region (relay): – Word region (data memory): 512 words (1,024 bytes) × 2 (1 for transmission and 1 for reception) | 
| Weight | approx 120g | 
Lựa chọn PLC phù hợp với Module keyence
| SKU | Mô tả | 
| CPU | |
| KV-X500 | CPU unit | 
| KV-8000 | CPU unit | 
| KV-7500 | CPU unit with built-in EtherNet/IP® port | 
| KV-7300 | CPU unit with built-in serial port | 
| KV-5500 | CPU unit with built-in EtherNet/IP® port | 
| KV-5000 | CPU unit with built-in Ethernet port | 
| KV-3000 | CPU unit with built-in serial port | 
| KV-1000 | CPU unit with built-in serial port | 
| KV-700 | CPU unit with built-in serial port | 
| I/O unit | |
| KV-B16RA | 16-point Screw Terminal Block, Relay Output | 
| KV-B16RC | 16-point Screw Terminal Block, Relay Output | 
| KV-B16TA | 16-point Screw Terminal Block, Transistor (Sink) | 
| KV-B16TC | 16-point Screw Terminal Block, Transistor (Sink) | 
| KV-B16TCP | 16-point Screw Terminal Block, Transistor (Source) | 
| KV-B16TD | 16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection | 
| KV-B16XA | 16-point Screw Terminal Block | 
| KV-B16XC | 16-point Screw Terminal Block | 
| KV-B8RC | 8-point Screw Terminal Block, Relay Output (Independent Common) | 
| KV-B8XTD | 8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection | 
| KV-C16XTD | 16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection | 
| KV-C32TA | 32-point Connector Transistor (Sink) | 
| KV-C32TC | 32-point Connector Transistor (Sink) | 
| KV-C32TCP | 32-point Connector Transistor (Source) | 
| KV-C32TD | 32-point Connector MOSFET (Sink) with Overcurrent Protection | 
| KV-C32XA | 32-point Connector | 
| KV-C32XC | 32-point Connector | 
| KV-C32XTD | 32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection | 
| KV-C64TA | 64-point Connector Transistor (Sink) | 
| KV-C64TC | 64-point Connector Transistor (Sink) | 
| KV-C64TCP | 64-point Connector Transistor (Source) | 
| KV-C64TD | 64-point Connector MOSFET (Sink) with Overcurrent Protection | 
| KV-C64XA | 64-point Connector | 
| KV-C64XB | 64-point Connector, with All Terminals Supporting 2-wire Sensors | 
| KV-C64XC | 64-point Connector | 
| KV-SIR32XT | High speed I/O unit | 
| I/O unit/Remote I/O unit | |
| KV-N16ER | Expansion output unit, output 16 points, relay output, screw terminal block | 
| KV-N16ET | Expansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block, | 
| KV-N16ETP | Expansion output unit 16-output Transistor (source) output Screw terminal block | 
| KV-N16EX | Expansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block | 
| KV-N8ER | Expansion output unit, output 8 points, relay output, screw terminal block | 
| KV-N8ET | Expansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block, | 
| KV-N8ETP | Expansion output unit 8-output Transistor (source) output Screw terminal block | 
| KV-N8EX | Expansion Input Unit DC Input 8 Points Type Screw Terminal Block | 
| KV-N8EXR | Expansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points) | 
| KV-N8EXT | Expansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points) | 
| KV-NC16ET | Expansion Output Unit 16-output Transistor (Sink) connector type | 
| KV-NC16ETE | Expansion output unit 16 outputs transistor (sink) output European terminal block | 
| KV-NC16ETP | Expansion output unit 16-output Transistor (source) output Connector type | 
| KV-NC16ETPE | Expansion output unit 16 outputs transistor (source) output European terminal block | 
| KV-NC16EX | Expansion Input Unit 16-input switching 5V/24V DC connector type | 
| KV-NC16EXE | Expansion input unit input 16 points European terminal block | 
| KV-NC16EXT | Expansion I/O unit 32-point connector type 16-input, 16-output (transistor) | 
| KV-NC32ET | Expansion Output Unit 32-output Transistor (Sink) connector type | 
| KV-NC32ETP | Expansion output unit 32-output Transistor (source) output Connector type | 
| KV-NC32EX | Expansion Input Unit 32-input switching 5V/24V DC connector type | 
| KV-NC32EXT | Expansion I/O unit 32-input 32-output Transistor (sink) output Connector type | 
| KV-NC8ER | Expansion Output Unit 8-output Relay connector type | 
| Analog/Temperature unit | |
| KV-AD40 | A/D Conversion Unit, 4 Analog Input Channels | 
| KV-AD40G | High-precision A/D Conversion Unit, 4 Analog Input Channels | 
| KV-AD40V | A/D Conversion Unit, 4 Analog Input Channels | 
| KV-AM40V | A/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels | 
| KV-DA40 | D/A Conversion Unit, 4 Analog Output Channels | 
| KV-DA40V | D/A Conversion Unit, 4 Analog Output Channels | 
| KV-SAD04 | High-speed analogue input unit | 
| KV-SDA04 | High-speed analogue output unit | 
| KV-TF40 | PID Temperature Adjustment Unit (Multi-input 4-channel) | 
| KV-TP40 | Temperature Analog Multi-input Unit (Multi-input 4-channel) | 
| Analog/Temperature unit/Remote I/O unit | |
| KV-N3AM | Analog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch | 
| KV-NC2DA | D/A conversion unit (2 points) | 
| KV-NC4AD | A/D Conversion Unit 4-point type | 
| KV-NC4TP | Temperature 4-input unit | 
| Remote I/O unit | |
| KL-16BR | 16-point Screw Terminal Block, Relay Output | 
| KL-16BT | 16-point Screw Terminal Block, Transistor (Sink) | 
| KL-16BX | 16-point Screw Terminal Block | 
| KL-16CT | 16-point Connector Transistor (Sink) | 
| KL-16CX | 16-point Connector | 
| KL-2DA | D/A Conversion Unit, 2 Analog Output Channels | 
| KL-2TF | PID Temperature Adjustment Unit (2-channel) | 
| KL-32CT | 32-point Connector Transistor (Sink) | 
| KL-32CX | 32-point Connector | 
| KL-4AD | A/D Conversion Unit, 4 Analog Input Channels | 
| KL-8BLR | 8-point Screw Terminal Block, Relay Output with Repeater Function | 
| KL-8BLT | 8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function | 
| KL-8BLX | 8-point Screw Terminal Block with Repeater Function | 
| KL-8BXR | 8 Input + 8 Relay Output Screw Terminal Block | 
| KL-8BXT | 8 Input + 8 Transistor (Sink) Output Screw Terminal Block | 
| KL-B1 | Joint Cable Adapter | 
| KL-DC1A | DC Current Input Unit | 
| KL-DC1V | DC Voltage Input Unit | 
| KL-LC1 | Load Cell Measurement Unit | 
| KL-N20V | KL Master Unit | 
| KL-T1 | T-shaped Branch Unit | 
| KL-WH1 | Power Measurement Unit | 
| KV-EP02 | EtherNet/IP® Compatible Communication Unit | 
| KV-RC16BR | 16-point Screw Terminal Block, Relay Output, with Repeater Function | 
| KV-RC16BT | 16-point Screw Terminal Block, Transistor Output, with Repeater Function | 
| KV-RC16BX | 16-point Screw Terminal Block Input, with Repeater Function | 
| KV-RC16BXT | 16-input + 16-output Screw Terminal Block, Transistor Output | 
| KV-RC32BT | 32-point Screw Terminal Block, Transistor Output | 
| KV-RC32BX | 32-point Screw Terminal Block Input | 
| KV-RC8BXR | 8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function | 
| KV-RC8BXT | 8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function | 
| Positioning/Motion unit | |
| KV-H20G | 2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter | 
| KV-H20S | 2-axis Pulse Train (Linear Interpolation Possible) | 
| KV-H40S | 4-axis Pulse Train (Linear Interpolation Possible) | 
| KV-MC20V | 2-axis Pulse Train Positioning Motion Unit | 
| KV-MC40V | 4-axis Pulse Train Positioning Motion Unit | 
| KV-ML16V | 16-axis ML 2-compatible Positioning Motion Unit | 
| KV-MX1 | INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card | 
| KV-SH04PL | High-Speed Positioning Unit | 
| KV-XH04ML | 4-Axis Positioning/Motion Unit | 
| KV-XH16ML | 16-Axis Positioning/Motion Unit | 
| Highspeed counter unit | |
| KV-SC20V | 2-channel Multi-function High-speed Counter Unit | 
| KV-SSC02 | High speed counter unit | 
| Information/Network unit | |
| KV-CL20 | Master/Local Unit | 
| KV-DN20 | DeviceNet® Unit | 
| KV-EP21V | EtherNet/IP® Unit | 
| KV-FL20V | FL-net Unit | 
| KV-L20V | Serial Communication Unit | 
| KV-L21V | Serial Communication Unit | 
| KV-LE20V | Ethernet Unit | 
| KV-LE21V | Ethernet Unit | 
| KV-LH20V | Communication Positioning Unit | 
| KV-LM20V | High-speed Multi-link (Megalink) Unit | 
| KV-LM21V | High-speed multi-link Unit | 
| KV-XL202 | Serial communication unit, 2 ports (RS-232C×2) | 
| KV-XL402 | Serial communication unit, 2 ports (RS-422A/485×2) | 
| KV-XLE02 | EtherNet unit, 2 ports | 
| Power/Bus connection unit | |
| KV-7000C | Bus Connection Unit | 
| KV-EB1 | Extension Unit | 
| KV-N1 | Conversion unit with connector unit | 
| KV-NC1 | Conversion unit with terminal block connector | 
| KV-PU1 | AC Power Supply Unit with Error Output | 
 
 

































