Module chuyển động Keyence KV-MC40V 4 vị trí
Nhiều người mua

Module chuyển động Keyence KV-MC40V 4 vị trí

14.000.000 ₫

Khối chuyển động định vị dãy xung 4 trục
SKU: KV-MC40V
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: hóa đơn VAT

Dịch vụ kèm theo:
✓ Lập trình & Sửa chữa PLC Keyence theo yêu cầu
✓ Lắp đặt & vận hành tận nơi
✓ Hỗ trợ kỹ thuật trọn đời
cam kết bán hàng giá tốt
Báo giá
Mã: kv-mc40v Danh mục: , Thẻ:
ModelKV-MC40V
TypePositioning/Motion unit
Number of control axes4 axes + 1 axis (virtual axis)
Built-in deviceRelay: 1280 points (80 ch), Data memory: 90 words (high speed) / 582 words (simple)
Output formatDifferential line driver output (switchable among 1-pulse method, 2-pulse method, and A/B-phase method)
Connectable CPU unitsKV-5500/5000/3000
Max. output pulse4 MHz
Control modePosition control
Control period1.0 ms
External interfaceInput: Photocoupler input, Output: Open collector output (30 VDC 50 mA)
Input time constantEach input is set in 11 stages for each block
Axis control function execution methodLadder program, motion flow
Motion flowProgram capacity: 768 KB, Max. number of blocks: 256 blocks, Max. number of flows: 32
Position unitmm, deg (angle), PLS (pulse count), decimal point position from 0 to 9 digits, unit conversion function available
Cumulative address-2,147,483,648 to +2,147,483,647 instruction units
Positioning modeAbsolute value/relative value
Position setting range-2,147,483,648 to +2,147,483,647 instruction units
InterpolationStraight-line interpolation (up to 16 axes), arc interpolation, helical interpolation
Acceleration/deceleration curveStraight-line, SIN, Bezier
Acceleration/deceleration time0 to 65,535 ms
Start-up timeIndependent: 500 to 600 µs, Interpolation (straight-line 2 axes): 600 to 700 µs, Interpolation (arc 2 axes): 700 to 800 µs
M-code1 to 65,000, WITH/AFTER mode
Sensor positioningExternal input – based switching control from speed to position
Number of points800 points/axis
Synchronisation controlInput: Counter (KV-MX1 required), instruction coordinates, current coordinates (KV-ML16V only)
ClutchSelect from direct, slide, and follow-up
CamResolution: 2,048 to 32,768, Amount of data: 4 to 64 (Number changes according to the resolution)
Contact output16 points (including 8 external output points) × 2
Correction during operationCorrection via auxiliary input, phase correction, and lead angle correction
Fine controlFine data work area: 8 MB, Built-in ROM capacity: 512 KB, Number of settings: Built-in ROM: 100, SD memory card: 1000
Origin returnOrigin sensor edge/midpoint, push origin return, Dog type (“With Z phase” or “Without Z phase” can be selected), data set type, no limit switch
Speed controlSpeed instruction range: –
Torque controlTorque instruction range: –
JOG/inchingInching (The number of pulses can be specified), JOG (high speed/low speed)
TeachingCurrent coordinate teaching and teaching from the counter current value are supported
Memory dataPoint parameters 800 points (each axis), synchronisation parameters (each axis), fine setting (built-in ROM: 512 KB, expandable with SD card), cam data motion flow setting, etc. can be read and written during RUN (with some restrictions)
High-speed counterWhen KV-MX1 is connected: INC 4 ch/ABS Grey, residual Grey, binary 2 ch (switched, based on settings), Max. 6.4 MHz (2-phase, 4 multiplication)
5-V power output5 V ±5%, Max. 100 mA (total value)
Output displayError status/Pulse output status
Self-diagnosis functionDiagnosis can be made through hardware error, various parameter errors, error number, and error messages
Parameter settingParameters can be set from KV-HPD1, “KV STUDIO,” and ladder programs
Data backupCoordinates and error/warning history backup, parameter settings backup via flash ROM, 100,000 times switching
Internal current consumptionMain unit: 180 mA or less, external I/O: 130 mA or less
WeightApprox. 225 g

Lựa chọn PLC phù hợp với Module keyence

SKUMô tả
CPU
KV-X500CPU unit
KV-8000CPU unit
KV-7500CPU unit with built-in EtherNet/IP® port
KV-7300CPU unit with built-in serial port
KV-5500CPU unit with built-in EtherNet/IP® port
KV-5000CPU unit with built-in Ethernet port
KV-3000CPU unit with built-in serial port
KV-1000CPU unit with built-in serial port
KV-700CPU unit with built-in serial port
I/O unit
KV-B16RA16-point Screw Terminal Block, Relay Output
KV-B16RC16-point Screw Terminal Block, Relay Output
KV-B16TA16-point Screw Terminal Block, Transistor (Sink)
KV-B16TC16-point Screw Terminal Block, Transistor (Sink)
KV-B16TCP16-point Screw Terminal Block, Transistor (Source)
KV-B16TD16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection
KV-B16XA16-point Screw Terminal Block
KV-B16XC16-point Screw Terminal Block
KV-B8RC8-point Screw Terminal Block, Relay Output (Independent Common)
KV-B8XTD8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection
KV-C16XTD16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32TA32-point Connector Transistor (Sink)
KV-C32TC32-point Connector Transistor (Sink)
KV-C32TCP32-point Connector Transistor (Source)
KV-C32TD32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32XA32-point Connector
KV-C32XC32-point Connector
KV-C32XTD32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64TA64-point Connector Transistor (Sink)
KV-C64TC64-point Connector Transistor (Sink)
KV-C64TCP64-point Connector Transistor (Source)
KV-C64TD64-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64XA64-point Connector
KV-C64XB64-point Connector, with All Terminals Supporting 2-wire Sensors
KV-C64XC64-point Connector
KV-SIR32XTHigh speed I/O unit
I/O unit/Remote I/O unit
KV-N16ERExpansion output unit, output 16 points, relay output, screw terminal block
KV-N16ETExpansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N16ETPExpansion output unit 16-output Transistor (source) output Screw terminal block
KV-N16EXExpansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block
KV-N8ERExpansion output unit, output 8 points, relay output, screw terminal block
KV-N8ETExpansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N8ETPExpansion output unit 8-output Transistor (source) output Screw terminal block
KV-N8EXExpansion Input Unit DC Input 8 Points Type Screw Terminal Block
KV-N8EXRExpansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points)
KV-N8EXTExpansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points)
KV-NC16ETExpansion Output Unit 16-output Transistor (Sink) connector type
KV-NC16ETEExpansion output unit 16 outputs transistor (sink) output European terminal block
KV-NC16ETPExpansion output unit 16-output Transistor (source) output Connector type
KV-NC16ETPEExpansion output unit 16 outputs transistor (source) output European terminal block
KV-NC16EXExpansion Input Unit 16-input switching 5V/24V DC connector type
KV-NC16EXEExpansion input unit input 16 points European terminal block
KV-NC16EXTExpansion I/O unit 32-point connector type 16-input, 16-output (transistor)
KV-NC32ETExpansion Output Unit 32-output Transistor (Sink) connector type
KV-NC32ETPExpansion output unit 32-output Transistor (source) output Connector type
KV-NC32EXExpansion Input Unit 32-input switching 5V/24V DC connector type
KV-NC32EXTExpansion I/O unit 32-input 32-output Transistor (sink) output Connector type
KV-NC8ERExpansion Output Unit 8-output Relay connector type
Analog/Temperature unit
KV-AD40A/D Conversion Unit, 4 Analog Input Channels
KV-AD40GHigh-precision A/D Conversion Unit, 4 Analog Input Channels
KV-AD40VA/D Conversion Unit, 4 Analog Input Channels
KV-AM40VA/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels
KV-DA40D/A Conversion Unit, 4 Analog Output Channels
KV-DA40VD/A Conversion Unit, 4 Analog Output Channels
KV-SAD04High-speed analogue input unit
KV-SDA04High-speed analogue output unit
KV-TF40PID Temperature Adjustment Unit (Multi-input 4-channel)
KV-TP40Temperature Analog Multi-input Unit (Multi-input 4-channel)
Analog/Temperature unit/Remote I/O unit
KV-N3AMAnalog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch
KV-NC2DAD/A conversion unit (2 points)
KV-NC4ADA/D Conversion Unit 4-point type
KV-NC4TPTemperature 4-input unit
Remote I/O unit
KL-16BR16-point Screw Terminal Block, Relay Output
KL-16BT16-point Screw Terminal Block, Transistor (Sink)
KL-16BX16-point Screw Terminal Block
KL-16CT16-point Connector Transistor (Sink)
KL-16CX16-point Connector
KL-2DAD/A Conversion Unit, 2 Analog Output Channels
KL-2TFPID Temperature Adjustment Unit (2-channel)
KL-32CT32-point Connector Transistor (Sink)
KL-32CX32-point Connector
KL-4ADA/D Conversion Unit, 4 Analog Input Channels
KL-8BLR8-point Screw Terminal Block, Relay Output with Repeater Function
KL-8BLT8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function
KL-8BLX8-point Screw Terminal Block with Repeater Function
KL-8BXR8 Input + 8 Relay Output Screw Terminal Block
KL-8BXT8 Input + 8 Transistor (Sink) Output Screw Terminal Block
KL-B1Joint Cable Adapter
KL-DC1ADC Current Input Unit
KL-DC1VDC Voltage Input Unit
KL-LC1Load Cell Measurement Unit
KL-N20VKL Master Unit
KL-T1T-shaped Branch Unit
KL-WH1Power Measurement Unit
KV-EP02EtherNet/IP® Compatible Communication Unit
KV-RC16BR16-point Screw Terminal Block, Relay Output, with Repeater Function
KV-RC16BT16-point Screw Terminal Block, Transistor Output, with Repeater Function
KV-RC16BX16-point Screw Terminal Block Input, with Repeater Function
KV-RC16BXT16-input + 16-output Screw Terminal Block, Transistor Output
KV-RC32BT32-point Screw Terminal Block, Transistor Output
KV-RC32BX32-point Screw Terminal Block Input
KV-RC8BXR8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function
KV-RC8BXT8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function
Positioning/Motion unit
KV-H20G2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter
KV-H20S2-axis Pulse Train (Linear Interpolation Possible)
KV-H40S4-axis Pulse Train (Linear Interpolation Possible)
KV-MC20V2-axis Pulse Train Positioning Motion Unit
KV-MC40V4-axis Pulse Train Positioning Motion Unit
KV-ML16V16-axis ML 2-compatible Positioning Motion Unit
KV-MX1INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card
KV-SH04PLHigh-Speed Positioning Unit
KV-XH04ML4-Axis Positioning/Motion Unit
KV-XH16ML16-Axis Positioning/Motion Unit
Highspeed counter unit
KV-SC20V2-channel Multi-function High-speed Counter Unit
KV-SSC02High speed counter unit
Information/Network unit
KV-CL20Master/Local Unit
KV-DN20DeviceNet® Unit
KV-EP21VEtherNet/IP® Unit
KV-FL20VFL-net Unit
KV-L20VSerial Communication Unit
KV-L21VSerial Communication Unit
KV-LE20VEthernet Unit
KV-LE21VEthernet Unit
KV-LH20VCommunication Positioning Unit
KV-LM20VHigh-speed Multi-link (Megalink) Unit
KV-LM21VHigh-speed multi-link Unit
KV-XL202Serial communication unit, 2 ports (RS-232C×2)
KV-XL402Serial communication unit, 2 ports (RS-422A/485×2)
KV-XLE02EtherNet unit, 2 ports
Power/Bus connection unit
KV-7000CBus Connection Unit
KV-EB1Extension Unit
KV-N1Conversion unit with connector unit
KV-NC1Conversion unit with terminal block connector
KV-PU1AC Power Supply Unit with Error Output

Thông tin bổ sung

Thương hiệu
Series

Có thể bạn thích…

Khu vực Miền Nam

Call: 03826 777 45 / Chat Zalo zalo

Khu vực Miền Bắc

Call: 0383 167 778 / Chat Zalo zalo

Khu vực Miền Trung

Call: 0388 895 669 / Chat Zalo zalo

Dịch vụ kỹ thuật/Bảo hành

Call: 0348 957 778 / Chat Zalo zalo

Email liên hệ

sale.haiautech@gmail.com

Những dịch vụ liên quan

Nhập khẩu thiết bị theo yêu cầu
Sửa chữa (Biến tần, HMI, PLC...)
Thiết kế và thi công tủ điện
Bảo trì thiết bị nhà máy định kỳ