Servo Motor Keyence SV2-B300AK 3kW

Model				SV2-B300AK
General specifications	Applicable servo amplifier			SV2-300L2, SV2-500L2
	Rated output			SV2-300L2: 2.4 kW, SV2-500L2: 2.9 kW
	Rated torque			SV2-300L2: 15.1 N·m ^1 SV2-500L2: 18.6N·m ^1
	Instant maximum torque			SV2-300L2: 45.1 N·m, SV2-500L2: 54.0 N·m
	Rated current			SV2-300L2: 19.6 Arms, SV2-500L2: 23.8 Arms
	Instant maximum current			SV2-300L2: 56 Arms, SV2-500L2: 70 Arms
	Rated rotation speed			1500 min^-1
	High rotation speed			3000 min^-1
	Torque constant			0.848 N·m/Arms
	Rotor moment of inertia			53.9 ×10^-4kg·m²
	Rated power rating			SV2-300L2: 42.2 kW/s, SV2-500L2: 64.2 kW/s
	Rated angle acceleration			SV2-300L2: 2800 rad/s², SV2-500L2: 3450 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7′ or less (reduced ratings at 1000 m 3280.8′ or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8’/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4’/s² (forward/backward)
		Impact resistance		490 m/s² 1607.6’/s² with servo motor flange surface as reference, 2 times
	Isolation rank			phase F
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			SV2-300L2: 3 x, SV2-500L2: 5 x
	Approx. weight			19.5 kg
Electromagnetic brake specifications	Capacity			18.5 W
	Rated voltage			24 VDC +10%/-0%
	Rated current (@20°C 68°F)			0.77 A
	Holding torque			43.1 N·m
	Release time			170 ms ^*2
	Operating time			100 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87″ × 7.87″ × 0.24″ (50 W / 100 W) or 250 × 250 × 6 mm 9.84″ × 9.84″ × 0.24″ (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75″ × 15.75″ × 0.79″ (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65″ × 21.65″ × 1.18″ (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.