| Product characteristics |
|---|
| Output signal | analogue signal; IO-Link |
| Measuring range | | -1…25 bar | -14.6…362.6 psi | -0.1…2.5 MPa |
|
| Process connection | threaded connection G 1/2 external thread sealing cone |
| Application |
|---|
| Special feature | Gold-plated contacts |
| Measuring element | ceramic-capacitive pressure measuring cell |
| Application | food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -25…125; (150 max. 1h) |
| Min. bursting pressure | |
| Pressure rating | |
| Vacuum resistance [mbar] | -1000 |
| Type of pressure | relative pressure |
| No dead space | yes |
| Electrical data |
|---|
| Operating voltage [V] | 18…30 DC |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| 2-wire |
|---|
| Current consumption [mA] | 3.5…21.5 |
| Power-on delay time [s] | < 1 |
| 3-wire |
|---|
| Current consumption [mA] | < 45 |
| Power-on delay time [s] | < 0.5 |
| Outputs |
|---|
| Total number of outputs | 2 |
| Output signal | analogue signal; IO-Link |
| Analogue current output [mA] | 4…20; (scalable; 1:5) |
| Max. load [Ω] | 700; (Ub = 24 V; (Ub – 9 V) / 21.5 mA) |
| Short-circuit proof | yes |
| Overload protection | yes |
| Measuring/setting range |
|---|
| Measuring range | | -1…25 bar | -14.6…362.6 psi | -0.1…2.5 MPa |
|
| Analogue start point | | -1…20 bar | -14.6…290 psi | -0.1…2 MPa |
|
| Analogue end point | | 4…25 bar | 58…362.6 psi | 0.4…2.5 MPa |
|
| In steps of | | 0.01 bar | 0.2 psi | 0.001 MPa |
|
| Factory setting | | ASP = 0.0 bar | AEP = 25.0 bar | |
|
| Temperature monitoring |
|---|
| Measuring range [°C] | -25…150 |
| Measuring range [°F] | -13…302 |
| Accuracy / deviations |
|---|
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,5 (nach DIN EN 61298-2); (incl. zero point and span error, non-linearity, hysteresis; Turn down 1:1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,1 (-25…85 °C); < ± 0,3 (85…150 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,1 (-25…85 °C); < ± 0,3 (85…150 °C) |
| Temperature monitoring |
|---|
| Accuracy [K] | ± 2.5 K + (0.045 x (ambient temperature – medium temperature)) |
| Response times |
|---|
| Damping for the analogue output dAA [s] | 0…4 |
| 2-wire |
|---|
| Step response time analogue output [ms] | 30 |
| 3-wire |
|---|
| Step response time analogue output [ms] | 7 |
| Temperature monitoring |
|---|
| Dynamic response T05 / T09 [s] | < 10 / < 25; (DIN EN 60751 water; > 0,9 m/s) |
| Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor ED2: Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A) |
| SIO mode | no |
| Required master port type | A; (when pin 2 not connected: B) |
| Min. process cycle time [ms] | 4.5 |
| IO-Link resolution pressure [bar] | 0.005 |
| IO-Link resolution temperature [K] | 0.2 |
| IO-Link process data (cyclical) | | function | bit length | | pressure | 16 | | temperature | 16 | | device status | 4 |
|
| IO-Link functions (acyclical) | application specific tag; internal temperature |
| Supported DeviceIDs | | Type of operation | DeviceID | | Default | 1019 |
|
| Operating conditions |
|---|
| Ambient temperature [°C] | -25…80 |
| Storage temperature [°C] | -40…100 |
| Protection | IP 67; IP 68; IP 69K |
| Mechanical data |
|---|
| Weight [g] | 252 |
| Materials | stainless steel (1.4404 / 316L); PTFE; FKM |
| Materials (wetted parts) | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PEEK; PTFE |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 20 |
| Process connection | threaded connection G 1/2 external thread sealing cone |
| anzeigen-bedienelemente |
|---|
| Remarks |
|---|
| Pack quantity | 1 pcs. |
| Electrical connection |
|---|
| Connection | Connector: 1 x M12; Contacts: gold-plated |
