| Product characteristics | ||
| Frequency range [Hz] | 2…10000 | |
| Measuring principle | capacitive | |
| v-RMS | ||
| Measuring range of vibration [mm/s] | 0…45 | |
| a-Peak / a-RMS | ||
| Measuring range of vibration | 0…50 g | 0…490.3 m/s² |
| Application | ||
| Application | industrial machines | |
| Electrical data | ||
| Operating voltage [V] | 18…30 DC | |
| Current consumption [mA] | < 50 | |
| Min. insulation resistance [MΩ] | 100; (500 V DC) | |
| Protection class | III | |
| Reverse polarity protection | yes | |
| Sensor type | microelectromechanical system (MEMS) | |
| Inputs / outputs | ||
| Number of inputs and outputs | Number of digital outputs: 2 | |
| Outputs | ||
| Output signal | switching signal; IO-Link | |
| Electrical design | PNP/NPN; (configurable) | |
| Number of digital outputs | 2 | |
| Output function | normally open / normally closed | |
| Max. voltage drop switching output DC [V] | 2 | |
| Max. current load per output [mA] | 100 | |
| Short-circuit protection | yes | |
| Type of short-circuit protection | pulsed | |
| Overload protection | yes | |
| Measuring/setting range | ||
| Note on setpoint SP | parameterisable | |
| Frequency range [Hz] | 2…10000 | |
| Measuring principle | capacitive | |
| Number of measurement axes | 1 | |
| v-RMS | ||
| Measuring range of vibration [mm/s] | 0…45 | |
| Set point SP [mm/s] | 0.2…45 | |
| Reset point rP [mm/s] | 0…44.8 | |
| In steps of [mm/s] | 0.2 | |
| a-Peak / a-RMS | ||
| Measuring range of vibration | 0…50 g | 0…490.3 m/s² |
| Set point SP | 0.2…50 g | 2…490.3 m/s² |
| Reset point rP | 0…49.8 g | 0…488.3 m/s² |
| In steps of | 0.2 g | 2 m/s² |
| Crest | ||
| Measuring range of vibration | 1…50 | |
| Set point SP | 2…50 | |
| Reset point rP | 1…49 | |
| In steps of | 1 | |
| Temperature measurement | ||
| Measuring range [°C] | -30…80 | |
| Resolution [°C] | 0.1 | |
| Set point SP [°C] | -28…80 | |
| Reset point rP [°C] | -30…78 | |
| In steps of [°C] | 2 | |
| Accuracy / deviations | ||
| Accuracy | ≤ 4 kHz +/-10 %; ≥ 4…10 kHz: < 3 dB | |
| Accuracy [K] | ± 2,5 K + (0,2 x (Umgebungstemperatur – Oberflächentemperatur)) | |
| Linearity deviation | 2% | |
| Software / programming | ||
| Parameter setting options | Software | |
| Diagnostic functions | self-test | |
| Interfaces | ||
| Communication interface | IO-Link | |
| Transmission type | COM2 (38,4 kBaud); COM3 (230,4 kBaud) | |
| IO-Link revision | 1.1 | |
| SDCI standard | IEC 61131-9: 2013-07 | |
| Profiles | Blob (0x0030); Measuring sensor (0x800A); Common Profile (0x4000) | |
| SIO mode | yes | |
| Required master port type | A | |
| Process data analogue | 10 | |
| Process data binary | 2 | |
| Min. process cycle time [ms] | 3.6 | |
| IO-Link functions (acyclical) | filter for v-RMS, a-RMS, a-Peak; Hysteresis; window; switch points; switching logic | |
| Supported DeviceIDs | Type of operation | DeviceID |
| Status A (COM2) | 1028 | |
| Status B (COM2 / COM3) | 1367 | |
| Note | For further information please see the IODD PDF file under “Downloads” | |
| Operating conditions | ||
| Ambient temperature [°C] | -30…80 | |
| Storage temperature [°C] | -30…80 | |
| Protection | IP 67; IP 68; IP 69K | |
| Mechanical data | ||
| Weight [g] | 116 | |
| Type of mounting | set screw | |
| Materials | housing: stainless steel (1.4404 / 316L) | |
| Tightening torque [Nm] | 8 | |
| Accessories | ||
| Items supplied | set screw: 1 x 1/4″ 28 UNF / M8 | |
| set screw: 1 x 1/4″28 UNF x 5/8″ DIN916 | ||
| Remarks | ||
| Pack quantity | 1 pcs. | |
| Electrical connection | Connector: 1 x M12; Maximum cable length: 20 m |
Cảm biến độ rung IFM VVB001
17.240.000 ₫
SKU: VVB001
Hãng sản xuất: IFM
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT
Khu vực Miền Nam
Call: 03826 777 45 / Chat Zalo 
Khu vực Miền Bắc
Call: 0383 167 778 / Chat Zalo
Khu vực Miền Trung
Call: 0388 895 669 / Chat Zalo
