| Product characteristics |
|---|
| Electrical design | PNP/NPN; (parameterisable) |
| Output function | normally open / normally closed; (parameterisable) |
| Communication interface | IO-Link |
| Housing | threaded type |
| Dimensions [mm] | M18 x 1 / L = 60 |
| Electrical data |
|---|
| Operating voltage [V] | 15…30 DC |
| Current consumption [mA] | < 30 |
| Protection class | II |
| Reverse polarity protection | yes |
| Outputs |
|---|
| Electrical design | PNP/NPN; (parameterisable) |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2.5 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 300 |
| Analogue voltage output [V] | 0…10; (linear; gradient: 2,222 V/mm; for frontal approach and for target made of mild steel: 18 x 18 x 1 mm) |
| Min. load resistance [Ω] | 2000 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Detection zone |
|---|
| Measuring range [mm] | 0.5…5 |
| Switch point IO-Link [mm] | 0.94…4.68 |
| Accuracy / deviations |
|---|
| Correction factor | steel: 1 / stainless steel: 0.7 / brass: 0.5 / aluminium: 0.5 / copper: 0.4 |
| Hysteresis [% of Sr] | 3…15 |
| Note on hysteresis | |
| Linearity error of analogue output [%] | ± 1; (of the final value of the measuring range) |
| Repeatability analogue output [%] | ± 1; (of the final value of the measuring range) |
| Temperature coefficient [%/K vom MEW] | ±0,15 |
| Temperature drift [% vom MEW] | ±5 |
| Response times |
|---|
| Response time [ms] | < 10 |
| Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor: Identification and diagnosis; Multi-channel, two setpoint switching sensor, type 0 Generic Profiled Sensor; Teach Channel |
| SIO mode | yes |
| Required master port type | A |
| Min. process cycle time [ms] | 3.2 |
| IO-Link process data (cyclical) | | function | bit length | | process value | 16 | | device status | 4 | | binary switching information | 2 |
|
| IO-Link functions (acyclical) | switching cycles counter; switch-on cycle counter; operating hours counter; internal temperature; application specific tag |
| Supported DeviceIDs | | Type of operation | DeviceID | | Default | 1206 |
|
| Note | | For further information please see the IODD PDF file under “Downloads” |
|
| Operating conditions |
|---|
| Ambient temperature [°C] | -25…80 |
| Protection | IP 65; IP 66; IP 67; IP 68; IP 69K |
| Mechanical data |
|---|
| Weight [g] | 47.5 |
| Housing | threaded type |
| Mounting | flush mountable |
| Dimensions [mm] | M18 x 1 / L = 60 |
| Thread designation | M18 x 1 |
| Materials | Housing: brass white bronze coated; sensing face: PBT orange; LED-Fenster: PEI; lock nuts: brass white bronze coated |
| Tightening torque [Nm] | 25 |
| Displays / operating elements |
|---|
| Display | | target in measuring range | 4 x LED, yellow lights | | target outside measuring range | 4 x LED, yellow flashing |
|
| Accessories |
|---|
| Accessories (supplied) | |
| Remarks |
|---|
| Pack quantity | 1 pcs. |
| Electrical connection – plug |
|---|
| Connection | Connector: 1 x M12 |
