| Product characteristics |
|---|
| Type of light | red light |
| Communication interface | IO-Link |
| Housing | rectangular |
| Dimensions [mm] | M18 x 1 |
| Application |
|---|
| Special feature | Background suppression |
| Function principle | Diffuse reflection sensor |
| Electrical data |
|---|
| Operating voltage [V] | 10…30 DC; (“supply class 2” to cULus) |
| Rated insulation voltage [V] | 32 |
| Current consumption [mA] | 25 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time [ms] | 300 |
| Type of light | red light |
| Wave length [nm] | 645 |
| Outputs |
|---|
| Electrical design | PNP |
| Output function | light-on/dark-on mode; (programmable) |
| Max. voltage drop switching output DC [V] | 2.5 |
| Permanent current rating of switching output DC [mA] | 200 |
| Switching frequency DC [Hz] | 1000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Detection zone |
|---|
| Range [mm] | 15…200; (white paper 200 x 200 mm 90% remission) |
| Range on white object (90 % remission) [mm] | 15…200 |
| Range on grey object (18 % remission) [mm] | 15…200 |
| Range on black object (6 % remission) [mm] | 15…200 |
| Range adjustable | yes |
| Max. light spot diameter [mm] | 13 |
| Light spot dimensions refer to | at maximum range |
| Background suppression available | yes |
| Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Measuring Sensor, Identification and Diagnosis, Switching Signal Channel, Teach Channel |
| SIO mode | yes |
| Required master port type | A |
| Min. process cycle time [ms] | 10 |
| IO-Link process data (cyclical) | | function | bit length | | process value | 16 | | device status | 4 | | binary switching information | 1 |
|
| IO-Link functions (acyclical) | application specific tag; operating hours counter; switching cycles counter |
| Supported DeviceIDs | | Type of operation | DeviceID | | Default | 1132 |
|
| Note | | For further information please see the IODD PDF file under “Downloads” |
|
| Operating conditions |
|---|
| Ambient temperature [°C] | -25…60 |
| Storage temperature [°C] | -40…60 |
| Protection | IP 67 |
| Mechanical data |
|---|
| Weight [g] | 60.5 |
| Housing | rectangular |
| Dimensions [mm] | M18 x 1 |
| Thread designation | M18 x 1 |
| Materials | diecast zinc; PEI |
| Lens material | |
| Displays / operating elements |
|---|
| Display | | switching status | 1 x LED, yellow | | operation | 1 x LED, green |
|
| Operating elements | | switch point | pushbutton | | Output function | pushbutton |
|
| Accessories |
|---|
| Accessories (supplied) | |
| Remarks |
|---|
| Pack quantity | 1 pcs. |
| Electrical connection |
|---|
| Connection | Connector: 1 x M12 |
| Other data |
|---|
| Repeatability / precision: 6 σ |
|---|
| repeatability of the measured values | | | Abstand | white (90 % remission) | black (6 %…90 % remission) | | 20 mm | 0.5 mm | 1.0 mm | | 50 mm | 0.8 mm | 2.0 mm | | 100 mm | 1.5 mm | 4.5 mm | | 150 mm | 3.0 mm | 9.0 mm | | 200 mm | 6.0 mm | 20.0 mm | | | | | Accuracy | | | Abstand | white (90 % remission) | black (6 %…90 % remission) | | 20 mm | ± 2.0 mm | ± 2.5 mm | | 50 mm | ± 3.5 mm | ± 4.5 mm | | 100 mm | ± 6.0 mm | ± 7.5 mm | | 150 mm | ± 7.5 mm | ± 11.0 mm | | 200 mm | ± 10.0 mm | ± 17.0 mm |
|
| The values apply at | | | Extraneous light on the object | < 10 klx | | constant ambient conditions | 23 °C / 960 hPa | | minimum power-on time in minutes | 10 |
|
