| Application |
|---|
| Application | only for operation with AS-i masters with the profile M4 |
| Electrical data |
|---|
| Operating voltage [V] | 18…31.6 DC |
| Max. current consumption from AS-i [mA] | 180; (without sensors: < 30 mA; inputs and outputs active: < 180 mA) |
| Protection class | III |
| Max. current load total [A] | 0.15; (total current for all outputs and sensor supply supplied from AS-i: 150 mA) |
| Integrated watchdog | yes |
| Inputs / outputs |
|---|
| Number of inputs and outputs | Number of digital inputs: 4; Number of digital outputs: 4 |
| Inputs |
|---|
| Number of digital inputs | 4 |
| Input circuit of digital inputs | PNP |
| Sensor supply of the inputs | AS-i |
| Voltage supply [V] | 18…30 |
| Max. total current rating of inputs [mA] | 150 |
| Input current High [mA] | 6…10 |
| Input current Low [mA] | 0…2 |
| Min. switching level high signal [V] | 11 |
| Digital inputs protected against short circuits | yes |
| Outputs |
|---|
| Number of digital outputs | 4 |
| Circuit | PNP |
| Voltage range DC [V] | AS-i |
| Max. current load per output [mA] | 100; (utilisation category DC-13 (control of electromagnets): 2,5 W (IEC 60947-5-1)) |
| Short-circuit proof | yes |
| Electrically separated | yes |
| Operating conditions |
|---|
| Ambient temperature [°C] | -25…55 |
| Protection | IP 20 |
| AS-i classification |
|---|
| AS-i version | 3.0 |
| Extended addressing mode possible | yes |
| AS-i profile | S-7.A.7 |
| AS-i I/O configuration [hex] | 7 |
| AS-i ID code [hex] | A.7 |
| AS-i certificate | 102301 |
| Mechanical data |
|---|
| Weight [g] | 74.5 |
| Type of mounting | installation in a surface-mounted housing |
| Dimensions [mm] | 31.1 x 12 x 76.6 |
| Materials | housing: PC potted |
| Displays / operating elements |
|---|
| Display | | operation | LED, green | | errors | LED, red | | function | LED, yellow |
|
| Remarks |
|---|
| Remarks | | A watchdog function switches the outputs off if there is no communication on the AS-i line. | | Install the unit so that exposed parts cannot be touched. | | Installation in a surface-mounted housing with the dimensions of 68 x 136 x 53 mm (LxWxH), e.g. Schneider Electric Harmony, XALD03, XALD04 | | Do not connect any of the following points to an external potential: | | 0-, I+, I1, I2, I3, I4 | | The connections are electrically connected with the AS-i cable. | | can be used up to a height of 2000 metres above sea level |
|
| Pack quantity | 1 pcs. |
| Electrical connection |
|---|
| , PVC |