| Product characteristics |
|---|
| Number of inputs and outputs | Number of digital inputs: 2; Number of analogue inputs: 1; Number of analogue outputs: 1 |
| Application |
|---|
| Application | only for operation with AS-i masters with the profile M4 |
| Electrical data |
|---|
| Operating voltage [V] | 26.5…31.6 DC; (“supply class 2” to cULus) |
| Max. current consumption from AS-i [mA] | 250 |
| Reverse polarity protection | yes |
| Max. current load total [A] | 0.2 |
| Inputs / outputs |
|---|
| Number of inputs and outputs | Number of digital inputs: 2; Number of analogue inputs: 1; Number of analogue outputs: 1 |
| Inputs |
|---|
| Number of digital inputs | 2 |
| Number of analogue inputs | 1 |
| Input circuit of digital inputs | PNP |
| Sensor supply of the inputs | AS-i |
| Voltage supply [V] | 18…30 |
| Analogue input (current) [mA] | 4…20 |
| Max. voltage drop across load for nominal voltage [V] | 10 |
| Analogue inputs protected against short circuits | yes |
| Resolution of analogue input | 12 bit |
| Outputs |
|---|
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4…20 |
| Max. voltage drop across load for nominal current [V] | 10 |
| Resolution of analogue output | 12 bit |
| Actuator supply analogue outputs | AS-i |
| Accuracy / deviations |
|---|
| Measuring error [% of the final value] | 0,5 |
| Operating conditions |
|---|
| Ambient temperature [°C] | -25…70 |
| Protection | IP 67 |
| AS-i classification |
|---|
| AS-i version | 3.0 |
| Extended addressing mode possible | no |
| AS-i profile | S-7.5.5 |
| AS-i I/O configuration [hex] | 7 |
| AS-i ID code [hex] | 5.5 |
| Assignment of the parameter bits | | parameter bit | function | | | | | | | P0 | watchdog analogue output | : 1 | activated | * / 0 | deactivated | | | P1 | peripheral fault indication analogue input | : 1 | activated | * / 0 | deactivated | | | P2 | peripheral fault indication analogue output | : 1 | activated | * / 0 | deactivated | | | P3 | not used | : 1 | default value | | | |
|
| Mechanical data |
|---|
| Weight [g] | 198 |
| Materials | PA; piercing contacts: CuSn6 nickel-plated and tin-plated |
| Displays / operating elements |
|---|
| Display | | operation | LED, green | | errors | LED, red | | function | LED, yellow |
|
| Accessories |
|---|
| Accessories (supplied) | |
| Accessories (optional) | | Protective cap: M12, E73004 |
|
| Remarks |
|---|
| Remarks | | 3-wire connection possible via external link. | | The actuator supply on pins 1 and 3 can be used to supply the sensors / actuators. | | In this case, an electrical isolation to AS-i is not given. | | The analogue inputs and outputs (pins 2 and 4) are electrically separated and have no connection to AS-i. | | Do not connect any of the following points to an external potential: | | I-1/2, I-2, Pin 1, Pin 3 |
|
| Pack quantity | 1 pcs. |
| Electrical connection |
|---|
| ; Maximum cable length: 30 m |
| Electrical connection – analogue |
|---|
| Connector: M12; Maximum cable length: 30 m |
| Electrical connection – digital |
|---|
| Connection | Connector: M12; Maximum cable length: 30 m |
