| Application |
|---|
| Medium temperature [°C] | -10…50 |
| Electrical data |
|---|
| Operating voltage [V] | 26.5…31.6 DC |
| Max. current consumption from AS-i [mA] | 280 |
| Additional voltage supply [V] | 18…30 DC; (to PELV) |
| Additional voltage supply [V] | required |
| Max. current consumption from additional supply [mA] | 10 |
| Integrated watchdog | yes |
| Inputs / outputs |
|---|
| Number of inputs and outputs | Number of digital inputs: 4; Number of pneumatic outputs: 2 |
| Inputs |
|---|
| Number of digital inputs | 4 |
| Input circuit of digital inputs | PNP |
| Sensor supply of the inputs | AS-i |
| Voltage supply [V] | 20…30; (via flat cable) |
| Max. total current rating of inputs [mA] | 200 |
| Input current High [mA] | 6…10 |
| Input current Low [mA] | 0…2 |
| Min. switching level high signal [V] | 11 |
| Digital inputs protected against short circuits | yes |
| Outputs |
|---|
| Electrical design | AUX |
| Number of pneumatic outputs | 2; (supply: external 24 V power supply) |
| Operating conditions |
|---|
| Ambient temperature [°C] | -10…55 |
| Protection | IP 65; IP 67 |
| AS-i classification |
|---|
| AS-i version | 2.11; 3.0 |
| AS-i addressing | addressing socket |
| Extended addressing mode possible | yes |
| AS-i profile | S-7.A.E |
| AS-i I/O configuration [hex] | 7 |
| AS-i ID code [hex] | A.E |
| AS-i certificate pending | yes |
| Assignment of the data bits | | data bit | D0 | D1 | D2 | D3 | | input | 1 | 2 | 3 | 4 | | socket | I-1/2 | I-1/2 I-2 | I-3/4 | I-3/4 I-4 | | pin | 4 | 2 4 | 4 | 2 4 | | pneumatic output | 2 | 4 | – | – |
|
| Mechanical data |
|---|
| Weight [g] | 381.5 |
| Type of mounting | quick mounting |
| Materials | PA; POM; piercing contacts: CuSn6 nickel-plated and tin-plated |
| Pneumatic system | 2 x 3/2-way slide valves (free from overlapping) |
| Operating pressure range [bar] | 2…8 |
| Operating pressure range [MPa] | 0.2…0.8 |
| Operating pressure range [psi] | 29…116 |
| Air flow at 6/5 bar [l/min] | 500 |
| Permissible compressed air | non-lubricated compressed air class 6-3-1; lubricated compressed air class 6-3-4 |
| Manual override | pressing/releasing or pressing/turning/locking |
| Tube fittings | 8 mm |
| Exhaust | exhaust can be discharged through tube connection |
| Displays / operating elements |
|---|
| Display | | operation | LED, green | | errors | LED, red | | function | LED, yellow |
|
| Accessories |
|---|
| Accessories (supplied) | |
| Accessories (optional) | | Mounting plate:, E74999 | | Module lower part:, E75000 | | Protective cap: M12, E73004 | | sealing plugs:, E75231 | | silencer:, E75232 | | Push-in L-fitting:, E75228 | | Push-in T-fitting:, E75227 |
|
| Remarks |
|---|
| Remarks | | If not pneumatically operated, E75231 sealing plug must be inserted. | | Avoid ingress of dirt and dust. | | Do not connect any of the following points to an external potential: | | L-, L+, I-1, I-2, I-3, I-4 | | The connections are electrically connected with the AS-i cable. | | Please see the notes on compressed air and EMC/ESD under “Downloads” |
|
| Pack quantity | 1 pcs. |
| Electrical connection |
|---|
| Connection | quick mounting technology for AS-i flat cable: ; three orientations possible |
| Connection | Connector: M12 |
