| Product characteristics | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 2 | ||||||||
| Factory setting | hydrous coolants; water; media similar to water | ||||||||
| Probe length L [mm] | 264 | ||||||||
| Application | |||||||||
| Special feature | Gold-plated contacts | ||||||||
| Media | hydrous coolants; oils; oil-based media; water; media similar to water | ||||||||
| Dielectric constant of the medium | > 2 | ||||||||
| Cannot be used for | extremely conductive media; adhering media; granulates; bulk material; acids; alkali; hygienic areas and electroplating applications | ||||||||
| Maximum speed of the change of level [mm/s] | 100 | ||||||||
| Tank pressure [bar] | 0.5; (unpressurized for applications to WHG (German Federal Water Act)) | ||||||||
| Coolants | |||||||||
| Medium temperature [°C] | 0…35; (with climatic tube E43100: 35…65 °C; not for applications to WHG (German Federal Water Act)) | ||||||||
| Oil | |||||||||
| Medium temperature [°C] | 0…70 | ||||||||
| Medium temperature short time [°C] | 0…90; (< 1 h) | ||||||||
| Water | |||||||||
| Medium temperature [°C] | 0…35; (with climatic tube E43100: 35…65 °C; not for applications to WHG (German Federal Water Act)) | ||||||||
| Electrical data | |||||||||
| Operating voltage [V] | 12…30 DC | ||||||||
| Current consumption [mA] | < 50 | ||||||||
| Protection class | III | ||||||||
| Reverse polarity protection | yes | ||||||||
| Power-on delay time [s] | < 3 | ||||||||
| Inputs / outputs | |||||||||
| Number of inputs and outputs | Number of digital outputs: 2 | ||||||||
| Outputs | |||||||||
| Total number of outputs | 2 | ||||||||
| Output signal | switching signal; IO-Link | ||||||||
| Electrical design | PNP/NPN | ||||||||
| Number of digital outputs | 2 | ||||||||
| Max. voltage drop switching output DC [V] | 2.5 | ||||||||
| Permanent current rating of switching output DC [mA] | 200 | ||||||||
| Short-circuit protection | yes | ||||||||
| Type of short-circuit protection | pulsed | ||||||||
| Overload protection | yes | ||||||||
| Measuring/setting range | |||||||||
| Factory setting | hydrous coolants; water; media similar to water | ||||||||
| Probe length L [mm] | 264 | ||||||||
| Active range A [mm] | 195 | ||||||||
| Inactive range I1 / I2 [mm] | 53 / 16 | ||||||||
| Setting range | |||||||||
| Set point SP [mm] | 25…200 | ||||||||
| Reset point rP [mm] | 20…195 | ||||||||
| In steps of [mm] | 5 | ||||||||
| Reference point OP [mm] | 69 – 82 – 94 – 106 – 118 – 130 – 143 – 155 – 167 – 179 – 191 – 204 – OFF | ||||||||
| Hysteresis, OP [mm] | 2 | ||||||||
| Accuracy / deviations | |||||||||
| Measuring error [% of the final value] | ± 5 | ||||||||
| Repeatability | ± 2 | ||||||||
| Resolution [mm] | 5 | ||||||||
| Software / programming | |||||||||
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; SP/rP position; adjustment OP; medium selection; offset setting; switch-on/switch-off delay | ||||||||
| Interfaces | |||||||||
| Communication interface | IO-Link | ||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||
| IO-Link revision | 1.1 | ||||||||
| SDCI standard | IEC 61131-9 | ||||||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||||||
| SIO mode | yes | ||||||||
| Required master port type | A | ||||||||
| Process data analogue | 3 | ||||||||
| Process data binary | 2 | ||||||||
| Min. process cycle time [ms] | 3.2 | ||||||||
| Supported DeviceIDs |
| ||||||||
| Operating conditions | |||||||||
| Ambient temperature [°C] | 0…60 | ||||||||
| Storage temperature [°C] | -25…80 | ||||||||
| Protection | IP 67 | ||||||||
| Mechanical data | |||||||||
| Weight [g] | 367.1 | ||||||||
| Dimensions [mm] | Ø 16 | ||||||||
| Materials | stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV | ||||||||
| Materials (wetted parts) | PP | ||||||||
| Displays / operating elements | |||||||||
| Display |
| ||||||||
| Remarks | |||||||||
| Pack quantity | 1 pcs. | ||||||||
| Electrical connection | |||||||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||||||
Cảm biến mức IFM LK1222
15.279.000 ₫
SKU: LK1222
Hãng sản xuất: IFM
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT
Khu vực Miền Nam
Call: 0345 177 768 / Chat Zalo 
Khu vực Miền Bắc
Call: 0384 988 968 / Chat Zalo
Khu vực Miền Trung
Call: 0374 687 899 / Chat Zalo
Dịch vụ kỹ thuật/Bảo hành
Call: 0348 957 778 / Chat Zalo
Email liên hệ
Dịch vụ cung ứng sản phẩm
Vì sản phẩm đa dạng, nếu Quý khách chưa tìm được. Vui lòng liên hệ để được hỗ trợ.
Tư vấn lựa chọn hoặc chuyển đổi
Nhập khẩu thiết bị theo yêu cầu
