Product characteristics |
---|
Output signal | switching signal; analogue signal; IO-Link; (configurable) |
Measuring range | -1…10 bar | -14.5…145 psi | -0.1…1 MPa |
|
Process connection | Clamp DN40 (1,5″) DIN 32676 (ISO 2852) |
Application |
---|
Special feature | Gold-plated contacts |
Application | food and beverage industry |
Media | viscous media and liquids with suspended particles; liquids and gases |
Medium temperature [°C] | -25…200 |
Min. bursting pressure | |
Pressure rating | |
Type of pressure | relative pressure; vacuum |
Electrical data |
---|
Min. insulation resistance [MΩ] | 100; (500 V DC) |
Protection class | III |
Reverse polarity protection | yes |
Integrated watchdog | yes |
2-wire |
---|
Operating voltage [V] | 20…32 DC |
Current consumption [mA] | 3.6…21 |
Power-on delay time [s] | 1 |
3-wire |
---|
Operating voltage [V] | 18…32 DC |
Current consumption [mA] | < 45 |
Power-on delay time [s] | 0.5 |
Inputs / outputs |
---|
Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
Outputs |
---|
Total number of outputs | 2 |
Output signal | switching signal; analogue signal; IO-Link; (configurable) |
Electrical design | PNP/NPN |
Number of digital outputs | 2 |
Output function | normally open / normally closed; (parameterisable) |
Number of analogue outputs | 1 |
Analogue current output [mA] | 4…20, invertible; (scalable) |
Short-circuit protection | yes |
Type of short-circuit protection | pulsed |
Overload protection | yes |
2-wire |
---|
Max. load [Ω] | 300 |
3-wire |
---|
Max. voltage drop switching output DC [V] | 2 |
Permanent current rating of switching output DC [mA] | 250 |
Switching frequency DC [Hz] | 125 |
Max. load [Ω] | (Ub – 10 V) / 20 mA |
Measuring/setting range |
---|
Measuring range | -1…10 bar | -14.5…145 psi | -0.1…1 MPa |
|
Set point SP | -0.98…10 bar | -14.2…145 psi | -0.098…1 MPa |
|
Reset point rP | -1…9.98 bar | -14.5…144.7 psi | -0.1…0.998 MPa |
|
Analogue start point | -1…7.5 bar | -14.5…108.7 psi | -0.1…0.75 MPa |
|
Analogue end point | 1.5…10 bar | 21.8…145 psi | 0.15…1 MPa |
|
In steps of | 0.01 bar | 0.1 psi | 0.001 MPa |
|
Factory setting | | SP1 = 2.50 bar | rP1 = 2.30 bar | | SP2 = 7.50 bar | rP2 = 7.30 bar | | ASP = 0.00 bar | AEP = 10.00 bar |
|
Accuracy / deviations |
---|
Switch point accuracy [% of the span] | < ± 0,2; (Turn down 1:1) |
Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
Characteristics deviation [% of the span] | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) |
Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
Temperature coefficient zero point [% of the span / 10 K] | < ± 0,2; (0…200 °C) |
Temperature coefficient span [% of the span / 10 K] | < ± 0,15; (0…200 °C) |
Response times |
---|
Damping for the switching output dAP [s] | 0…30 |
Damping for the analogue output dAA [s] | 0.01…99.99 |
2-wire |
---|
Step response time analogue output [ms] | 45 |
3-wire |
---|
Min. response time of switching output (dAP) [ms] | 3 |
Step response time analogue output [ms] | 7 |
Interfaces |
---|
Communication interface | IO-Link |
Transmission type | COM2 (38,4 kBaud) |
IO-Link revision | 1.0 |
SDCI standard | IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002 |
Profiles | no profile |
SIO mode | yes |
Required master port type | A |
Process data analogue | 1 |
Process data binary | 2 |
Min. process cycle time [ms] | 2.3 |
Supported DeviceIDs | Type of operation | DeviceID | Default | 157 |
|
Operating conditions |
---|
Ambient temperature [°C] | -25…80 |
Note on ambient temperature | Medium temperature: ≤ 160 °C |
|
Ambient temperature [°C] | -25…65 |
Note on ambient temperature | Medium temperature: ≤ 200 °C |
|
Storage temperature [°C] | -25…100 |
Protection | IP 67; IP 68; IP 69K |
Mechanical data |
---|
Weight [g] | 1048.2 |
Materials | stainless steel (1.4404 / 316L) stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L) stainless steel (1.4404 / 316L); PBT; PEI; PFA |
Materials (wetted parts) | stainless steel (1.4435 / 316L) stainless steel (1.4404 / 316L) |
Min. pressure cycles | 10 million |
Process connection | Clamp DN40 (1,5″) DIN 32676 (ISO 2852) |
Surface characteristics Ra/Rz of the wetted parts | < 0.38 / – |
Fill fluid for pressure transfer | NEOBEE (food grade, FDA compliant) |
Diaphragm diameter [mm] | 34 |
Displays / operating elements |
---|
Display | Display unit | LED, green | switching status | LED, yellow | function display | alphanumeric display, 4-digit | measured values | alphanumeric display, 4-digit |
|
Display unit | bar; psi; MPa; % of the span |
Remarks |
---|
Pack quantity | 1 pcs. |
Electrical connection |
---|
| Connector: 1 x M12; Contacts: gold-plated |