Product characteristics |
---|
Output signal | switching signal |
Measuring range [bar] | 0…250 |
Process connection | threaded connection G 1/4 internal thread |
Application |
---|
Special feature | Gold-plated contacts |
Application | for industrial applications |
Media | liquids and gases |
Conditionally suitable for | use in gases at pressures > 25 bar only on request |
Medium temperature [°C] | -25…80 |
Min. bursting pressure [bar] | 850 |
Pressure rating [bar] | 400 |
Type of pressure | relative pressure |
Electrical data |
---|
Operating voltage [V] | 18…30 DC |
Current consumption [mA] | < 90 |
Min. insulation resistance [MΩ] | 100; (500 V DC) |
Protection class | III |
Reverse polarity protection | yes |
Power-on delay time [s] | 0.2 |
Integrated watchdog | yes |
Inputs / outputs |
---|
Number of inputs and outputs | Number of digital outputs: 2 |
Inputs |
---|
Analogue input (current) [mA] | 0…20 |
Max. load [Ω] | 300 |
Analogue input (voltage) [V] | 0…10 |
Min. load resistance [Ω] | 90000 |
Outputs |
---|
Total number of outputs | 2 |
Output signal | switching signal |
Electrical design | PNP/NPN |
Number of digital outputs | 2 |
Output function | normally open / normally closed; (parameterisable) |
Max. voltage drop switching output DC [V] | 2 |
Permanent current rating of switching output DC [mA] | 250 |
Switching frequency DC [Hz] | < 170 |
Short-circuit protection | yes |
Type of short-circuit protection | pulsed |
Overload protection | yes |
Measuring/setting range |
---|
Measuring range [bar] | 0…250 |
Set point SP [bar] | -62…250 |
Note on setpoint SP | |
Reset point rP [bar] | -63…249 |
Note on setpoint SP | |
In steps of [bar] | 1 |
Accuracy / deviations |
---|
Characteristics deviation [% of the final value] | < ± 0,6 |
Temperature drift per 10 K | < ± 0.3 |
Characteristics deviation analogue input | < ± 0.3 |
Temperature drift analogue input per 10 K | < ± 0.1 |
Temperature drift analogue input [°C] | 0…80 |
Response times |
---|
Response time [ms] | < 3 |
Delay time programmable dS, dr [s] | 0, 0,1…50 |
Damping for the switching output dAP [s] | 0…4 |
Software / programming |
---|
Adjustment of the switch point | programming button |
Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current/voltage input; Damping; adaptation of displayed values; display can be rotated and switched off; Display unit |
Operating conditions |
---|
Ambient temperature [°C] | -25…80 |
Storage temperature [°C] | -40…100 |
Protection | IP 67 |
Mechanical data |
---|
Weight [g] | 293 |
Materials | stainless steel (1.4305 / 303); PBT; PC; PA; FKM |
Materials (wetted parts) | stainless steel (1.4305 / 303); ceramics; FKM |
Min. pressure cycles | 100 million |
Process connection | threaded connection G 1/4 internal thread |
Restrictor element integrated | no (can be retrofitted) |
Displays / operating elements |
---|
Display | Display unit | 3 x LED, green | display mode | 3 x LED, green | switching status | 2 x LED, yellow | function display | alphanumeric display, 4-digit | measured values | alphanumeric display, 4-digit |
|
Display unit | bar; psi; MPa |
Remarks |
---|
Pack quantity | 1 pcs. |
Electrical connection |
---|
Connection | Connector: 1 x M12; Contacts: gold-plated |