Product characteristics |
---|
Output signal | switching signal; analogue signal; (configurable) |
Measuring range | -0.25…0.25 bar | -250…250 mbar | -3.63…3.63 psi | -25…25 kPa |
|
Process connection | threaded connection G 1/4 internal thread |
Application |
---|
Special feature | Gold-plated contacts |
Media | liquids and gases |
Medium temperature [°C] | -25…80 |
Min. bursting pressure | 30000 mbar | 435 psi | 3000 kPa |
|
Pressure rating | |
Type of pressure | relative pressure |
Electrical data |
---|
Operating voltage [V] | 18…32 DC |
Current consumption [mA] | < 50 |
Min. insulation resistance [MΩ] | 100; (500 V DC) |
Protection class | III |
Reverse polarity protection | yes |
Power-on delay time [s] | 0.5 |
Integrated watchdog | yes |
Inputs / outputs |
---|
Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
Outputs |
---|
Total number of outputs | 2 |
Output signal | switching signal; analogue signal; (configurable) |
Electrical design | PNP/NPN |
Number of digital outputs | 1 |
Output function | normally open / normally closed; (parameterisable) |
Max. voltage drop switching output DC [V] | 2 |
Permanent current rating of switching output DC [mA] | 250 |
Switching frequency DC [Hz] | 6 |
Number of analogue outputs | 1 |
Analogue current output [mA] | 4…20; (scalable 1:4) |
Max. load [Ω] | (Ub – 10 V) / 20 mA |
Analogue voltage output [V] | 0…10; (scalable 1:4) |
Min. load resistance [Ω] | 2000 |
Short-circuit protection | yes |
Type of short-circuit protection | pulsed |
Overload protection | yes |
Measuring/setting range |
---|
Measuring range | -0.25…0.25 bar | -250…250 mbar | -3.63…3.63 psi | -25…25 kPa |
|
Set point SP | -248…250 mbar | -3.61…3.63 psi | -24.8…25 kPa |
|
Reset point rP | -250…248 mbar | -3.63…3.6 psi | -25…24.8 kPa |
|
Analogue start point | -250…125 mbar | -3.63…1.82 psi | -25…12.5 kPa |
|
Analogue end point | -125…250 mbar | -1.82…3.63 psi | -12.5…25 kPa |
|
In steps of | |
Accuracy / deviations |
---|
Switch point accuracy [% of the span] | < ± 0,2; (Turn down 1:1) |
Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
Characteristics deviation [% of the span] | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) |
Linearity deviation [% of the span] | < ± 0,1; (Turn down 1:1) |
Hysteresis deviation [% of the span] | < ± 0,1; (Turn down 1:1) |
Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
Temperature coefficient zero point [% of the span / 10 K] | < ± 0,2; (0…70 °C) |
Temperature coefficient span [% of the span / 10 K] | < ± 0,2; (0…70 °C) |
Response times |
---|
Response time [ms] | < 100 |
Damping for the switching output dAP [s] | 0.1…100 |
Damping for the analogue output dAA [s] | 0.1…100 |
Max. response time analogue output [ms] | 100 |
Software / programming |
---|
Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current/voltage output; Damping; adaptation of displayed values; display can be rotated and switched off; Display unit; zero point; span |
Operating conditions |
---|
Ambient temperature [°C] | -25…80 |
Storage temperature [°C] | -40…100 |
Protection | IP 65 |
Mechanical data |
---|
Weight [g] | 287.5 |
Materials | stainless steel (1.4301 / 304); PC; PBT; PA; FKM |
Materials (wetted parts) | stainless steel (1.4305 / 303); ceramics; FKM |
Min. pressure cycles | 100 million |
Process connection | threaded connection G 1/4 internal thread |
Restrictor element integrated | no (can be retrofitted) |
Displays / operating elements |
---|
Display | Display unit | 4 x LED, green | switching status | LED, yellow | function display | alphanumeric display, 4-digit | measured values | alphanumeric display, 4-digit |
|
Display unit | mbar; kPa; psi; % of the span |
Remarks |
---|
Pack quantity | 1 pcs. |
Electrical connection |
---|
Connection | Connector: 1 x M12; Contacts: gold-plated |