| Product characteristics | |||||
|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||
| Measuring range |
| ||||
| Process connection | threaded connection G 1 external thread Aseptoflex Vario | ||||
| Installation length EL [mm] | 87.5 | ||||
| Application | |||||
| Special feature | Gold-plated contacts | ||||
| Measuring element | 1 x Pt 1000 + 1 x NTC; (thermically coupled, with backup function (temperature measuring even if one element fails)) | ||||
| Media | liquids and gases | ||||
| Pressure rating [bar] | 50 | ||||
| Minimum installation depth [mm] | 25 | ||||
| MAWP (for applications according to CRN) [bar] | 50 | ||||
| Electrical data | |||||
| Operating voltage [V] | 18…32 DC; (“supply class 2” to cULus) | ||||
| Current consumption [mA] | 6; (24 V) | ||||
| Protection class | III | ||||
| Reverse polarity protection | yes | ||||
| Power-on delay time [s] | 8 | ||||
| Integrated watchdog | yes | ||||
| Inputs / outputs | |||||
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||
| Outputs | |||||
| Total number of outputs | 2 | ||||
| Output signal | switching signal; analogue signal; IO-Link; (configurable) | ||||
| Electrical design | PNP/NPN | ||||
| Number of digital outputs | 1 | ||||
| Output function | normally open / normally closed / diagnostic signal; (parameterisable) | ||||
| Max. voltage drop switching output DC [V] | 2 | ||||
| Permanent current rating of switching output DC [mA] | 150; (200 (…60°C); 250 (…40 °C)) | ||||
| Diagnostic output | diagnostic output for drift and fault monitoring | ||||
| Number of analogue outputs | 1 | ||||
| Analogue current output [mA] | 4…20 | ||||
| Max. load [Ω] | (Ub – 15 V) x 50 | ||||
| Short-circuit protection | yes | ||||
| Type of short-circuit protection | pulsed | ||||
| Overload protection | yes | ||||
| Measuring/setting range | |||||
| Measuring range |
| ||||
| Note on measuring range |
| ||||
| Factory setting | 0…150 °C / 32…302 °F | ||||
| Drift warning |
| ||||
| Drift alarm |
| ||||
| In steps of |
| ||||
| Resolution | |||||
| Resolution of analogue output [K] | 0.05 | ||||
| Accuracy / deviations | |||||
| Precision analogue output [K] | ± 0,2 (-10…130°C); ± 0,3 (130…140°C); ± 0,3 ± 0,1% MS (-25…-10/140…160°C); (probe completely inserted into the measured medium up to the sealing chamfer) | ||||
| Temperature coefficient [% of the span / 10 K] | < ± 0,01; (in case of deviation from the reference condition 25 ± 5 °C) | ||||
| Response times | |||||
| Dynamic response T05 / T09 [s] | 3 / 6 | ||||
| Software / programming | |||||
| Parameter setting options | drift warning/drift alarm threshold; Fail-Safe; Display unit; scaling of the analogue output; redundancy switching; performance diagnostic output; switching logic; normally open / normally closed | ||||
| Interfaces | |||||
| Communication interface | IO-Link | ||||
| Transmission type | COM1 (4,8 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 CDV | ||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||
| SIO mode | yes | ||||
| Required master port type | A | ||||
| Process data analogue | 1 | ||||
| Process data binary | 1 | ||||
| Min. process cycle time [ms] | 18.8 | ||||
| Supported DeviceIDs |
| ||||
| Operating conditions | |||||
| Ambient temperature [°C] | -25…70 | ||||
| Storage temperature [°C] | -40…85 | ||||
| Protection | IP 68; IP 69K | ||||
| Mechanical data | |||||
| Weight [g] | 411.5 | ||||
| Materials | stainless steel (1.4435 / 316L); stainless steel (1.4404 / 316L); PEI; FKM | ||||
| Materials (wetted parts) | stainless steel (1.4435 / 316L); stainless steel (1.4404 / 316L) | ||||
| Process connection | threaded connection G 1 external thread Aseptoflex Vario | ||||
| Surface characteristics Ra/Rz of the wetted parts | Ra: < 0.6 | ||||
| Installation length EL [mm] | 87.5 | ||||
| Remarks | |||||
| Remarks |
| ||||
| Pack quantity | 1 pcs. | ||||
| Electrical connection | |||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||
Cảm biến nhiệt độ IFM TAD181
19.054.000 ₫
SKU: TAD181
Hãng sản xuất: IFM
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT
Cam kết và hỗ trợ
Luôn có giá tốt nhất thị trường
Giao hàng trên toàn quốc
Hỗ trợ dịch vụ kỹ thuật
Khu vực Miền Nam
Call: 0386 334 447 / Chat Zalo 
Khu vực Miền Bắc
Call: 0384 988 968 / Chat Zalo
Khu vực Miền Trung
Call: 0374 687 899 / Chat Zalo
Dịch vụ kỹ thuật/Bảo hành
Call: 0348 957 778 / Chat Zalo
Email liên hệ
Dịch vụ cung ứng sản phẩm
Vì sản phẩm đa dạng, nếu Quý khách chưa tìm được. Vui lòng liên hệ để được hỗ trợ.
Tư vấn lựa chọn hoặc chuyển đổi
Nhập khẩu thiết bị theo yêu cầu
