| Product characteristics | |||||
|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||
| Measuring range |
| ||||
| Process connection | diameter Ø 6 mm | ||||
| Installation length EL [mm] | 100 | ||||
| Application | |||||
| Special feature | Gold-plated contacts | ||||
| Measuring element | 1 x Pt 1000 | ||||
| Reference element | 1 x NTC | ||||
| Media | liquids and gases | ||||
| Pressure rating [bar] | 160 | ||||
| Electrical data | |||||
| Operating voltage [V] | 18…32 DC; (“supply class 2” to cULus) | ||||
| Current consumption [mA] | 10; (24 V) | ||||
| Protection class | III | ||||
| Reverse polarity protection | yes | ||||
| Power-on delay time [s] | 6 | ||||
| Integrated watchdog | yes | ||||
| Inputs / outputs | |||||
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||
| Outputs | |||||
| Total number of outputs | 2 | ||||
| Output signal | analogue signal; IO-Link; calibration check status | ||||
| Electrical design | PNP/NPN | ||||
| Number of digital outputs | 1 | ||||
| Output function | normally open; (diagnostic signal) | ||||
| Max. voltage drop switching output DC [V] | 2 | ||||
| Permanent current rating of switching output DC [mA] | 100 | ||||
| Diagnostic output | calibration check status and error diagnostics | ||||
| Number of analogue outputs | 1 | ||||
| Analogue current output [mA] | 4…20 | ||||
| Max. load [Ω] | (Ub – 15 V) x 50 | ||||
| Short-circuit protection | yes | ||||
| Type of short-circuit protection | pulsed | ||||
| Overload protection | yes | ||||
| Measuring/setting range | |||||
| Measuring range |
| ||||
| Note on measuring range |
| ||||
| Factory setting | -10…150 °C / 14…302 °F | ||||
| Calibration check limit [K] | 0.5…3 | ||||
| In steps of [K] | 0.05 | ||||
| Resolution | |||||
| Resolution of analogue output [K] | 0.05 | ||||
| Accuracy / deviations | |||||
| Precision analogue output [K] | ± 0,2 | ||||
| Precision IO-Link [K] | ± 0,2 | ||||
| Temperature coefficient analogue output [% of the span / 10 K] | < ± 0,02; (in case of deviation from the reference condition 25 ± 5 °C) | ||||
| Temperature coefficient IO-Link [% of the span / 10 K] | < ± 0,01; (in case of deviation from the reference condition 25 ± 5 °C) | ||||
| Response times | |||||
| Dynamic response T05 / T09 [s] | 1,5 / 4 | ||||
| Software / programming | |||||
| Parameter setting options | Display unit; scaling of the analogue output; calibration check limit; switching logic diagnostic output; simulation mode | ||||
| Interfaces | |||||
| Communication interface | IO-Link | ||||
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 CDV | ||||
| Profiles | Digital Measuring Sensor, Common Profile, Blob Transfer | ||||
| SIO mode | yes | ||||
| Required master port type | A | ||||
| Process data analogue | 1 | ||||
| Process data binary | 1 | ||||
| Min. process cycle time [ms] | 4.4 | ||||
| IO-Link resolution temperature [K] | 0.01 | ||||
| Supported DeviceIDs |
| ||||
| Operating conditions | |||||
| Ambient temperature [°C] | -25…70 | ||||
| Note on ambient temperature |
| ||||
| Storage temperature [°C] | -40…100 | ||||
| Protection | IP 68; IP 69K | ||||
| Mechanical data | |||||
| Weight [g] | 275.6 | ||||
| Dimensions [mm] | Ø 50 / L = 143.5 | ||||
| Materials | stainless steel (1.4404 / 316L); PEI; FKM; PFA | ||||
| Materials (wetted parts) | stainless steel (1.4404 / 316L); PEEK | ||||
| Process connection | diameter Ø 6 mm | ||||
| Surface characteristics Ra/Rz of the wetted parts | Ra: < 0.8 | ||||
| Probe diameter [mm] | 6 | ||||
| Installation length EL [mm] | 100 | ||||
| Remarks | |||||
| Remarks |
| ||||
| Pack quantity | 1 pcs. | ||||
| Electrical connection | |||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||
Cảm biến nhiệt độ IFM TCC231
16.894.000 ₫
SKU: TCC231
Hãng sản xuất: IFM
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT
Khu vực Miền Nam
Call: 0345 177 768 / Chat Zalo 
Khu vực Miền Bắc
Call: 0384 988 968 / Chat Zalo
Khu vực Miền Trung
Call: 0374 687 899 / Chat Zalo
Dịch vụ kỹ thuật/Bảo hành
Call: 0348 957 778 / Chat Zalo
Email liên hệ
Dịch vụ cung ứng sản phẩm
Vì sản phẩm đa dạng, nếu Quý khách chưa tìm được. Vui lòng liên hệ để được hỗ trợ.
Tư vấn lựa chọn hoặc chuyển đổi
Nhập khẩu thiết bị theo yêu cầu
