SD6100 - Đồng hồ đo khí nén IFM

Product characteristics

Number of inputs and outputs

Number of digital outputs: 2; Number of analogue outputs: 1

Process connection

threaded connection R 1/2 DN15

Measuring range [m³/h]

0.4…122

CO2

Measuring range [m³/h]

0.2…74.7

Measuring range [m³/h]

0.2…75

Application

for industrial applications

Media

Argon (Ar); carbon dioxide (CO2); nitrogen (N2)

Medium temperature [°C]

0…60

Pressure rating [bar]

Pressure rating [Mpa]

1.6

Electrical data

Operating voltage [V]

18…30 DC; (according to EN 50178 SELV/PELV)

Current consumption [mA]

< 100

Protection class

III

Reverse polarity protection

yes

Power-on delay time [s]

Inputs / outputs

Number of inputs and outputs

Number of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs

Output signal

switching signal; analogue signal; pulse signal; IO-Link; (configurable)

Electrical design

PNP

Number of digital outputs

Output function

normally open / normally closed; (parameterisable)

Max. voltage drop switching output DC [V]

Permanent current rating of switching output DC [mA]

250; (per output)

Number of analogue outputs

Analogue current output [mA]

4…20; (scalable)

Max. load [Ω]

500

Pulse output

consumed quantity meter

Short-circuit protection

yes

Type of short-circuit protection

pulsed

Overload protection

yes

Measuring/setting range

Low flow cut-off LFC [m³/h]

< 1.3

Measuring dynamics

1:300

Measuring range [m³/h]

0.4…122

Display range [m³/h]

0…146.4

Resolution [m³/h]

0.1

Set point SP [m³/h]

1.1…122

Reset point rP [m³/h]

0.6…121.5

Analogue start point ASP [m³/h]

0…97.6

Analogue end point AEP [m³/h]

24.4…122

In steps of [m³/h]

0.1

CO2

Measuring range [m³/h]

0.2…74.7

Display range [m³/h]

0…89.7

Resolution [m³/h]

0.1

Set point SP [m³/h]

0.7…74.7

Reset point rP [m³/h]

0.4…74.4

Analogue start point ASP [m³/h]

0…59.8

Analogue end point AEP [m³/h]

14.9…74.7

In steps of [m³/h]

0.1

Volumetric flow quantity monitoring

Pulse value

0.001…1 000 000 m³

In steps of

0.001…1000 m³

Pulse length [s]

0,012…2

Measuring range [m³/h]

0.2…75

Display range [m³/h]

0…90

Resolution [m³/h]

0.1

Set point SP [m³/h]

0.7…75

Reset point rP [m³/h]

0.4…74.7

Analogue start point ASP [m³/h]

0…60

Analogue end point AEP [m³/h]

15…75

In steps of [m³/h]

0.1

Temperature monitoring

Measuring range [°C]

0…60

Display range [°C]

-12…72

Resolution [°C]

0.2

Set point SP [°C]

0.4…60

Reset point rP [°C]

0…59.8

Analogue start point [°C]

0…48

Analogue end point [°C]

12…60

In steps of [°C]

0.2

Accuracy / deviations

Flow monitoring

Repeatability [% of the measured value]

± 1,5

Accuracy (in the measuring range)

± (6 % MW + 0,6 % MEW); (conditions: installation to DIN ISO 2533; installation in pipes: DN15)

Temperature monitoring

Accuracy [K]

± 2; (medium flow in the limit area of the flow measurement range)

Response times

Flow monitoring

Response time [s]

0.1; (dAP = 0)

Damping for the switching output dAP in steps [s]

0 – 0,2 – 0,4 – 0,6 – 0,8 – 1

Software / programming

Parameter setting options

Flow monitoring; quantity meter; Preset counter; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; medium selection

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

Profiles

Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

4.1

Supported DeviceIDs


Type of operation	DeviceID
Default	265

Operating conditions

Ambient temperature [°C]

0…60

Storage temperature [°C]

-20…85

Max. relative air humidity [%]

Protection

IP 65

Mechanical data

Weight [g]

963.5

Materials

PBT-GF20; PC; PC; stainless steel (1.4301 / 304); FKM

Materials (wetted parts)

stainless steel (1.4301 / 304); ceramics glass passivated; PEEK; polyester; FKM; aluminium anodised

Tightening torque [Nm]

Process connection

threaded connection R 1/2 DN15

Displays / operating elements

Display


Display unit	4 x LED, green (Nl/min, Nm³/h, Nm³, °C)
function display	1 x LED, yellow
switching status	2 x LED, yellow
measured values	alphanumeric display, 4-digit
programming	alphanumeric display, 4-digit

Display unit

Nl/min; Nm³/h; Nm³; °C

Remarks


MW = measured value
MEW = Final value of the measuring range
Measuring, display and setting ranges refer to the standard volume flow according to DIN ISO 2533.

Pack quantity

1 pcs.

Electrical connection

Connection

Connector: 1 x M12