| Product characteristics |
|---|
| Resolution | 65536 steps; 32768 revolutions; 31 bit |
| Communication interface | IO-Link |
| Shaft design | hollow shaft open to one side |
| Shaft diameter [mm] | 12 |
| Application |
|---|
| Function principle | absolute |
| Revolution type | multiturn |
| Detection system | magnetic |
| Electrical data |
|---|
| Operating voltage [V] | 18…30 DC; (to PELV) |
| Rated insulation voltage [V] | 30 |
| Current consumption [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time [ms] | 1000 |
| Max. revolution electrical [U/min] | 6000 |
| Inputs |
|---|
| Short-circuit protection digital inputs | yes |
| Measuring/setting range |
|---|
| Resolution | 65536 steps; 32768 revolutions; 31 bit |
| Accuracy / deviations |
|---|
| Accuracy [°] | 0.1 |
| Software / programming |
|---|
| Parameter setting options | preset; zero point; direction of rotation; rotational speed |
| Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Identification and Diagnosis; Switching Signal Channel; Measurement Data Channel (high resolution) |
| SIO mode | no |
| Required master port type | A |
| Min. process cycle time [ms] | 2.3 |
| IO-Link process data (cyclical) | | function | bit length | | process value | 96 | | device status | 4 | | binary switching information | 5 |
|
| IO-Link functions (acyclical) | application specific tag; operating hours counter; internal temperature; switching cycles counter; shaft movement in hours |
| Supported DeviceIDs | | Type of operation | DeviceID | | Default | 1064 |
|
| Note | | For further information please see the IODD PDF file under “Downloads” |
|
| Operating conditions |
|---|
| Ambient temperature [°C] | -40…85 |
| Storage temperature [°C] | -40…85 |
| Max. relative air humidity [%] | 98; (condensation not permissible) |
| Protection | IP 68; IP 69K |
| Mechanical data |
|---|
| Weight [g] | 382.5 |
| Dimensions [mm] | Ø 42 / L = 89.5 |
| Materials | flange: stainless steel (1.4404 / 316L) ; housing: stainless steel (1.4521 / 444); plug: stainless steel (1.4401 / 316) |
| Max. starting torque [Nm] | 5 |
| Reference temperature torque [°C] | 20 |
| Shaft design | hollow shaft open to one side |
| Shaft diameter [mm] | 12 |
| Shaft material | | stainless steel (1.4112 / 440B) |
|
| Installation depth of shaft [mm] | 22 |
| Max. axial shaft misalignment [mm] | 0,5 |
| Electrical connection – plug |
|---|
| Connector: 1 x M12 |