Product characteristics |
---|
Resolution | 65536 steps; 32768 revolutions; 31 bit |
Communication interface | IO-Link |
Shaft design | solid shaft |
Shaft diameter [mm] | 10 |
Application |
---|
Function principle | absolute |
Revolution type | multiturn |
Electrical data |
---|
Operating voltage [V] | 18…30 DC; (to PELV) |
Rated insulation voltage [V] | 30 |
Current consumption [mA] | < 75 |
Protection class | III |
Reverse polarity protection | yes |
Max. power-on delay time [ms] | 1000 |
Max. revolution electrical [U/min] | 6000 |
Outputs |
---|
Short-circuit protection | yes |
Measuring/setting range |
---|
Resolution | 65536 steps; 32768 revolutions; 31 bit |
Accuracy / deviations |
---|
Accuracy [°] | 0.1 |
Software / programming |
---|
Parameter setting options | preset; zero point; direction of rotation; rotational speed |
Interfaces |
---|
Communication interface | IO-Link |
Transmission type | COM3 (230,4 kBaud) |
IO-Link revision | 1.1 |
SDCI standard | IEC 61131-9 CDV |
Profiles | Identification and Diagnosis; Switching Signal Channel; Measurement Data Channel (high resolution) |
SIO mode | no |
Required master port type | A |
Min. process cycle time [ms] | 2.3 |
IO-Link process data (cyclical) | function | bit length | process value | 96 | device status | 4 | binary switching information | 5 |
|
IO-Link functions (acyclical) | application specific tag; operating hours counter; internal temperature; switching cycles counter |
Supported DeviceIDs | Type of operation | DeviceID | Default | 1064 |
|
Note | For further information please see the IODD PDF file under “Downloads” |
|
Operating conditions |
---|
Ambient temperature [°C] | -40…85 |
Storage temperature [°C] | -40…85 |
Max. relative air humidity [%] | 98; (condensation not permissible) |
Protection | IP 68; IP 69K |
Mechanical data |
---|
Weight [g] | 472.1 |
Dimensions [mm] | Ø 42 / L = 107.9 |
Materials | flange: stainless steel (1.4404 / 316L) ; housing: stainless steel (1.4404 / 316L) ; plug: stainless steel (1.4401 / 316) |
Max. starting torque [Nm] | 5 |
Reference temperature torque [°C] | 20 |
Shaft design | solid shaft |
Shaft diameter [mm] | 10 |
Shaft material | stainless steel (1.4112 / 440B) |
|
Max. shaft load axial (at the shaft end) [N] | 300 |
Max. shaft load radial (at the shaft end) [N] | 300 |
Fixing flange | synchro-flange |
Electrical connection – plug |
---|
| Connector: 1 x M12 |