Cảm biến lưu lượng Keyence FD-MZ10AYKP

Main Unit, Landscape, 10 L/min, PNP
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT

Báo giá
Mã: FD-MZ10AYKP Danh mục: ,
ShapeBuilt-in amplifier
Rated flow range0.14 – 2.60 G/min (0.50 – 10 L/min)*1
Possible display range0.14 – 6.35 G/min (0.50 – 30 L/min)*2
Possible ranges to set0 – 6.35 G/min (0 – 30 L/min)
Connection portNPT3/8 (10 A)
Detectable fluidsWater or non-corrosive liquid
Conductivity of detection fluids5 µS/cm or higher
Detection fluid temperature0 to +85°C 32 to 185 °F (No freezing)
Pressure lossMax. 1.45 PSI (0.01 MPa)
Display methodDual row display with 4-digit, 7 segment LED, bar display (2 colors), output indicators, flow indicator
Display resolution0.01/0.1 (G/min, L/min) selectable
Repeatability0.5 s : ±5% of F.S., 1 s : ±3.5% of F.S., 2.5 s : ±2.5% of F.S., 5 s : ±1.6% of F.S., 10 s : ±1% of F.S., 30 s : ±0.8% of F.S., 60 s : ±0.6% of F.S.*3
Response time (chatter prevention feature)0.5 s/1 s/2.5 s/5 s/10 s/30 s/60 s variable
Accumulated flow unit0.01/0.1/1/10/100 (G, L) selectable
Integration data storage cycleSave to memory every 10 seconds
Memory backupEEPROM (Data storage length : 10 years or longer, Data read/write frequency : 1 million times or more)
Control output/Accumulation pulse output/ Error alarm outputPNP open collector, max. 100 mA/ch*4 30 V or less,residual voltage 1 V or less, 3 outputs (N.O./N.C. switchable)
Analog output4-20 mA, max. load resistance 260 Ω Analog output range can be set to any value
Integration reset/bank switch input/flow zero function inputInput time : 20 ms or greater,Select either the accumulation output or the accumulation pulse by setting the mode
Minimum flow volume0.14 G/min (0.50 L/min)*5
Power consumption (Current consumption)Normal : 1700 mW (70 mA), Power save : 1000 mW (40 mA)
RatingPower voltage24 VDC, Ripple (P-P) 10 % or less, Class 2
Environmental resistanceEnclosure ratingIP65
Pressure resistance290 PSI (2.0 MPa)
Applied pressure rangeMax. 145 PSI (1.0 MPa)
Ambient temperature0 to +50 °C 32 to 122 °F (No freezing)
Relative humidity35 to 85 % RH (No condensation)
Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions
MaterialLiquid end materialsBore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)
Other materialsPlastic case areas : PPS, Metal case areas : SUS430, Cable : PVC
AccessoryInstruction Manual, Connector cable (2.7 m 106.3″)
WeightApprox. 865 g
*1 The rated flow range indicates recommended operating range.*2 Can be used within the display range as well as within the rated flow range.*3 The repeatability for FD-MZ10ATK (P)/YK (P) in the range of 5.20 to 7.50 G/min (20 to 30 L/min) is the double of the value listed in the table. The repeatability is the error of thedetection point when fluids flow repeatedly under the same conditions.*4 Maximum 20 mA for alarm output.*5 Durchfluss unterhalb des Mindest-Durchflusses wird als 0 l/min angezeigt.

Thông tin bổ sung

Thương hiệu
Thời gian bảo hành

1 Năm

Yêu cầu tư vấn0342 678 887(Call/Zalo)

Có thể bạn thích…

Khu vực Miền Nam

Call: 0345 177 768 / Chat Zalo zalo

Khu vực Miền Bắc

Call: 0384 988 968 / Chat Zalo zalo

Khu vực Miền Trung

Call: 0374 687 899 / Chat Zalo zalo

Dịch vụ kỹ thuật/Bảo hành

Call: 0348 957 778 / Chat Zalo zalo

Email liên hệ