| Model | FL-001 | |||
| Type | Standard (G3/4) | |||
| Measurement range | 100 to 2,000 mm 3.94″ to 78.74″ | |||
| Specific conductive capacity of measurable media | 2 or more*1 | |||
| Resolution | 1 mm 0.04″*2 | |||
| Linearity | ±3 mm ±0.12″*2 | |||
| Temperature characteristics | 0.1 mm/°C | |||
| Undetectable area | In the case of water | Top side | 25 mm 0.98″ | |
| Bottom side | 10 mm 0.39″*3 | |||
| In the case of oil | Top side | 50 mm 1.97″ | ||
| Bottom side | 30 mm 1.18″*3 | |||
| Judgment output response time | 0.4 s minimum | |||
| Probe horizontal torque | 6 N m | |||
| Tank pressure | -0.1 to +0.5 Mpa | |||
| Connection port | G3/4 | |||
| Control output | Judgment output/alarm output | NPN/PNP open collector (selectable), 30 VDC max., 50 mA max. for eachResidual voltage: 2 V max. for NPN, 2.5 V max. for PNP, N.O./N.C. switchable | ||
| Analog output | 4 to 20 mA, maximum load resistance: 350 Ω (Response time: 0.1 s after comparator output determined [90 % response])Ripple when target remains stationary (P-P) 2 % of F.S. max. | |||
| Network compatibility | IO-Link*4 | |||
| Analog output accuracy | Resolution | 1 mm 0.04″ | ||
| Zero accuracy | ±0.1 mA (Zero point = 4 mA) | |||
| Full scale accuracy | ±0.2 mA (full scale = 20 mA) | |||
| Applicable cable | 8-pin M12 connector | |||
| Rating | Power voltage | 10 to 30 VDC, ripple (P-P) 10% included, Class 2 or LPS | ||
| Current consumption | 300 mA max. (at 10 V)/120 mA max. (at 30 V) (excluding load) | |||
| Environmental resistance | Enclosure rating | IP67 | ||
| Ambient temperature | -20 to +60 °C -4 to +140°F | |||
| Relative humidity | 35 to 85 % RH (No condensation) | |||
| Operating medium temperature | -20 to +100 °C -4 to +212 °F | |||
| Vibration resistance | 10 to 55 Hz, 0.75 mm 0.03″ double amplitude in X, Y and Z directions, 2 hours respectively | |||
| Shock resistance | 300 m/s2 in 6 directions, 3 times respectively | |||
| Material | Liquid end materials | Probe: SUS304Housing bottom seal section: PTFEPacking: FKM (bottom of the shielded part) | ||
| Case | Metal section of the housing: SUS304, SUS303Plastic section of the housing: PBT, PAR, NBR, HNBR, PET | |||
| Weight | 400 g | |||
| *1 These values were measured at the position of 100 mm 3.94″ or less from the wall of a metal tank. Contact KEYENCE for the case of a plastic tank.*2 These values were measured under the following conditions.Medium: Water, Tank material: Metal, Linearity range: Between 6 cm 2.36″ from the top and 1 cm 0.39″ from the bottom, Average time: 4 s*3 For the sanitary/plastic types, the undetectable area from the bottom end varies depending on the length of the probe.*4 Compatible with IO-Link Specification V1.1/COM 2 (38.4 kbps). | ||||
Bộ khuếch đại cảm biến mức Keyence FL-001
Amplifier Unit, Standard Specification
SKU: FL-001
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT
Thông tin bổ sung
| Thương hiệu | |
|---|---|
| Thời gian bảo hành | 1 Năm |
| Series | |
| Yêu cầu tư vấn | 0983 995 440(Call/Zalo) |
Có thể bạn thích…
Khu vực Miền Nam
Call: 0345 177 768 / Chat Zalo 
Khu vực Miền Bắc
Call: 0384 988 968 / Chat Zalo
Khu vực Miền Trung
Call: 0374 687 899 / Chat Zalo
Dịch vụ kỹ thuật/Bảo hành
Call: 0348 957 778 / Chat Zalo
Email liên hệ
Dịch vụ cung ứng sản phẩm
Vì sản phẩm đa dạng, nếu Quý khách chưa tìm được. Vui lòng liên hệ để được hỗ trợ.
Tư vấn lựa chọn hoặc chuyển đổi
Nhập khẩu thiết bị theo yêu cầu
