| KV-700 Specifications | |
| Model | KV-700 |
| Type | CPU Unit |
| Power Voltage | 24 VDC (±10%) |
| Operating Ambient Temperature | 0 to 50 °C (no freezing)*1*2 |
| Relative Humidity | 35 to 85 % RH (no condensation)*1 |
| Storage Temperature | -20 to +70 °C*1 |
| Operating Environment | Best in an environment with minimal dust and corrosive gases |
| Altitude | 2,000 m or less |
| Noise Immunity | 1,500 Vp-p or more, pulse width 1 µs, 50 ns (based on noise simulator), Conforms to IEC standards (IEC61000-4-2/3/4/6) |
| Withstand Voltage | 1,500 VAC for 1 minute between power supply terminal and I/O terminal or external terminal and enclosure |
| Insulation Resistance | Over 50 MΩ (measured between power supply terminal and I/O terminal or external terminal and enclosure with a 500 V DC megohmmeter) |
| Overvoltage Category | II (When using KV-U7) |
| Pollution Degree | 2 |
| Intermittent Vibration (Shock Resistance) | Frequency 10 to 57 Hz, Half amplitude: 0.075 mm*3 Frequency 57 to 150 Hz, Acceleration: 9.8 m/s2*3 |
| Continuous Vibration (Shock Resistance) | Frequency 10 to 57 Hz, Half amplitude: 0.035 mm*3 Frequency 57 to 150 Hz, Acceleration: 4.9 m/s2*3 |
| Operation Control Method | Program storage method |
| I/O Control Method | Refresh method |
| Programming Language | Expanded Ladder, Mnemonic |
| Number of Instructions | Basic instructions: 67 classes, 122 instructions Application instructions: 19 classes, 19 instructions Arithmetic operation instructions: 64 classes, 294 instructions Expansion instructions: 31 classes, 48 instructions Total: 181 classes, 483 instructions |
| Instruction Execution Speed | Basic instructions: 100 ns minimum Application instructions: 100 ns minimum |
| Program Capacity | Approx. 16k steps (Approx. 32k steps with memory expansion) |
| Maximum Number of Installable Units | 16 units (48 units when expansion units are connected) |
| Maximum Number of I/O Points | Max. 3,086 points when expanded (KV-EB1S/KV-EB1R: when 2 units are expanded, using 64-point I/O units) |
| Input Relay R (Bit Devices) | Total 9,530 points 1 bit |
| Output Relay R (Bit Devices) | Total 9,530 points 1 bit |
| Internal Auxiliary Relay R (Bit Devices) | Total 9,530 points 1 bit |
| Control Relay CR (Bit Devices) | 640 points 1 bit |
| Timer T (Word Devices) | Total 512 points 32 bit |
| Counter C (Word Devices) | Total 512 points 32 bit |
| Data Memory DM (Word Devices) | 20,000 points 16 bit (40,000 points 16 bit with memory expansion) |
| Temporary Data Memory TM (Word Devices) | 512 points 16 bit |
| High-Speed Counter CTH (Word Devices) | 2 points 32 bit |
| High-Speed Counter Comparator CTC (Word Devices) | 4 points 32-bit (uses 2 high-speed counter points) |
| Control Memory CM (Word Devices) | 4,000 points 16 bit |
| Positioning Pulse Output | 2 points (100 kHz max. output frequency) |
| CPU Unit I/O | Inputs: 10 points, Outputs: 4 points |
| Program Memory (Power Off Hold Function) | Flash memory rewritable 100,000 times |
| Devices (Power Off Hold Function) | Battery backup for 5 years (operating ambient temperature 25 °C, during power off hold mode)*4 |
| Self-Diagnosis Function | CPU error, RAM error, others |
| Internal Current Consumption | CPU unit: 160 mA or less Expansion unit: KV-EB1S 15 mA or less, KV-EB1R 25 mA or less (Excluding drive current for input circuit) |
| Weight | CPU unit: KV-700 Approx. 240 g, Memory expansion for KV-700 (OP-42138) Approx. 10 g Terminal block: Approx. 30 g Start block for KV-1000/700: Approx. 30 g Expansion unit: KV-EB1S Approx. 90 g, KV-EB1R Approx. 115 g |
Lựa chọn PLC phù hợp với Module keyence
| SKU | Mô tả |
| CPU | |
| KV-X500 | CPU unit |
| KV-8000 | CPU unit |
| KV-7500 | CPU unit with built-in EtherNet/IP® port |
| KV-7300 | CPU unit with built-in serial port |
| KV-5500 | CPU unit with built-in EtherNet/IP® port |
| KV-5000 | CPU unit with built-in Ethernet port |
| KV-3000 | CPU unit with built-in serial port |
| KV-1000 | CPU unit with built-in serial port |
| KV-700 | CPU unit with built-in serial port |
| I/O unit | |
| KV-B16RA | 16-point Screw Terminal Block, Relay Output |
| KV-B16RC | 16-point Screw Terminal Block, Relay Output |
| KV-B16TA | 16-point Screw Terminal Block, Transistor (Sink) |
| KV-B16TC | 16-point Screw Terminal Block, Transistor (Sink) |
| KV-B16TCP | 16-point Screw Terminal Block, Transistor (Source) |
| KV-B16TD | 16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection |
| KV-B16XA | 16-point Screw Terminal Block |
| KV-B16XC | 16-point Screw Terminal Block |
| KV-B8RC | 8-point Screw Terminal Block, Relay Output (Independent Common) |
| KV-B8XTD | 8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection |
| KV-C16XTD | 16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C32TA | 32-point Connector Transistor (Sink) |
| KV-C32TC | 32-point Connector Transistor (Sink) |
| KV-C32TCP | 32-point Connector Transistor (Source) |
| KV-C32TD | 32-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C32XA | 32-point Connector |
| KV-C32XC | 32-point Connector |
| KV-C32XTD | 32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C64TA | 64-point Connector Transistor (Sink) |
| KV-C64TC | 64-point Connector Transistor (Sink) |
| KV-C64TCP | 64-point Connector Transistor (Source) |
| KV-C64TD | 64-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C64XA | 64-point Connector |
| KV-C64XB | 64-point Connector, with All Terminals Supporting 2-wire Sensors |
| KV-C64XC | 64-point Connector |
| KV-SIR32XT | High speed I/O unit |
| I/O unit/Remote I/O unit | |
| KV-N16ER | Expansion output unit, output 16 points, relay output, screw terminal block |
| KV-N16ET | Expansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block, |
| KV-N16ETP | Expansion output unit 16-output Transistor (source) output Screw terminal block |
| KV-N16EX | Expansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block |
| KV-N8ER | Expansion output unit, output 8 points, relay output, screw terminal block |
| KV-N8ET | Expansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block, |
| KV-N8ETP | Expansion output unit 8-output Transistor (source) output Screw terminal block |
| KV-N8EX | Expansion Input Unit DC Input 8 Points Type Screw Terminal Block |
| KV-N8EXR | Expansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points) |
| KV-N8EXT | Expansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points) |
| KV-NC16ET | Expansion Output Unit 16-output Transistor (Sink) connector type |
| KV-NC16ETE | Expansion output unit 16 outputs transistor (sink) output European terminal block |
| KV-NC16ETP | Expansion output unit 16-output Transistor (source) output Connector type |
| KV-NC16ETPE | Expansion output unit 16 outputs transistor (source) output European terminal block |
| KV-NC16EX | Expansion Input Unit 16-input switching 5V/24V DC connector type |
| KV-NC16EXE | Expansion input unit input 16 points European terminal block |
| KV-NC16EXT | Expansion I/O unit 32-point connector type 16-input, 16-output (transistor) |
| KV-NC32ET | Expansion Output Unit 32-output Transistor (Sink) connector type |
| KV-NC32ETP | Expansion output unit 32-output Transistor (source) output Connector type |
| KV-NC32EX | Expansion Input Unit 32-input switching 5V/24V DC connector type |
| KV-NC32EXT | Expansion I/O unit 32-input 32-output Transistor (sink) output Connector type |
| KV-NC8ER | Expansion Output Unit 8-output Relay connector type |
| Analog/Temperature unit | |
| KV-AD40 | A/D Conversion Unit, 4 Analog Input Channels |
| KV-AD40G | High-precision A/D Conversion Unit, 4 Analog Input Channels |
| KV-AD40V | A/D Conversion Unit, 4 Analog Input Channels |
| KV-AM40V | A/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels |
| KV-DA40 | D/A Conversion Unit, 4 Analog Output Channels |
| KV-DA40V | D/A Conversion Unit, 4 Analog Output Channels |
| KV-SAD04 | High-speed analogue input unit |
| KV-SDA04 | High-speed analogue output unit |
| KV-TF40 | PID Temperature Adjustment Unit (Multi-input 4-channel) |
| KV-TP40 | Temperature Analog Multi-input Unit (Multi-input 4-channel) |
| Analog/Temperature unit/Remote I/O unit | |
| KV-N3AM | Analog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch |
| KV-NC2DA | D/A conversion unit (2 points) |
| KV-NC4AD | A/D Conversion Unit 4-point type |
| KV-NC4TP | Temperature 4-input unit |
| Remote I/O unit | |
| KL-16BR | 16-point Screw Terminal Block, Relay Output |
| KL-16BT | 16-point Screw Terminal Block, Transistor (Sink) |
| KL-16BX | 16-point Screw Terminal Block |
| KL-16CT | 16-point Connector Transistor (Sink) |
| KL-16CX | 16-point Connector |
| KL-2DA | D/A Conversion Unit, 2 Analog Output Channels |
| KL-2TF | PID Temperature Adjustment Unit (2-channel) |
| KL-32CT | 32-point Connector Transistor (Sink) |
| KL-32CX | 32-point Connector |
| KL-4AD | A/D Conversion Unit, 4 Analog Input Channels |
| KL-8BLR | 8-point Screw Terminal Block, Relay Output with Repeater Function |
| KL-8BLT | 8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function |
| KL-8BLX | 8-point Screw Terminal Block with Repeater Function |
| KL-8BXR | 8 Input + 8 Relay Output Screw Terminal Block |
| KL-8BXT | 8 Input + 8 Transistor (Sink) Output Screw Terminal Block |
| KL-B1 | Joint Cable Adapter |
| KL-DC1A | DC Current Input Unit |
| KL-DC1V | DC Voltage Input Unit |
| KL-LC1 | Load Cell Measurement Unit |
| KL-N20V | KL Master Unit |
| KL-T1 | T-shaped Branch Unit |
| KL-WH1 | Power Measurement Unit |
| KV-EP02 | EtherNet/IP® Compatible Communication Unit |
| KV-RC16BR | 16-point Screw Terminal Block, Relay Output, with Repeater Function |
| KV-RC16BT | 16-point Screw Terminal Block, Transistor Output, with Repeater Function |
| KV-RC16BX | 16-point Screw Terminal Block Input, with Repeater Function |
| KV-RC16BXT | 16-input + 16-output Screw Terminal Block, Transistor Output |
| KV-RC32BT | 32-point Screw Terminal Block, Transistor Output |
| KV-RC32BX | 32-point Screw Terminal Block Input |
| KV-RC8BXR | 8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function |
| KV-RC8BXT | 8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function |
| Positioning/Motion unit | |
| KV-H20G | 2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter |
| KV-H20S | 2-axis Pulse Train (Linear Interpolation Possible) |
| KV-H40S | 4-axis Pulse Train (Linear Interpolation Possible) |
| KV-MC20V | 2-axis Pulse Train Positioning Motion Unit |
| KV-MC40V | 4-axis Pulse Train Positioning Motion Unit |
| KV-ML16V | 16-axis ML 2-compatible Positioning Motion Unit |
| KV-MX1 | INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card |
| KV-SH04PL | High-Speed Positioning Unit |
| KV-XH04ML | 4-Axis Positioning/Motion Unit |
| KV-XH16ML | 16-Axis Positioning/Motion Unit |
| Highspeed counter unit | |
| KV-SC20V | 2-channel Multi-function High-speed Counter Unit |
| KV-SSC02 | High speed counter unit |
| Information/Network unit | |
| KV-CL20 | Master/Local Unit |
| KV-DN20 | DeviceNet® Unit |
| KV-EP21V | EtherNet/IP® Unit |
| KV-FL20V | FL-net Unit |
| KV-L20V | Serial Communication Unit |
| KV-L21V | Serial Communication Unit |
| KV-LE20V | Ethernet Unit |
| KV-LE21V | Ethernet Unit |
| KV-LH20V | Communication Positioning Unit |
| KV-LM20V | High-speed Multi-link (Megalink) Unit |
| KV-LM21V | High-speed multi-link Unit |
| KV-XL202 | Serial communication unit, 2 ports (RS-232C×2) |
| KV-XL402 | Serial communication unit, 2 ports (RS-422A/485×2) |
| KV-XLE02 | EtherNet unit, 2 ports |
| Power/Bus connection unit | |
| KV-7000C | Bus Connection Unit |
| KV-EB1 | Extension Unit |
| KV-N1 | Conversion unit with connector unit |
| KV-NC1 | Conversion unit with terminal block connector |
| KV-PU1 | AC Power Supply Unit with Error Output |
