| Product characteristics |
|---|
| Dimensions [mm] | 90 x 62 x 33.2 |
| Inclination measurement |
|---|
| Number of measurement axes | 2 |
| Application |
|---|
| Application | High-precision inclination measurement in 2 axes for mobile and industrial applications |
| Electrical data |
|---|
| Operating voltage [V] | 9.2…30 DC; (voltage output: 12…30 DC; IO-Link: 18…30 DC) |
| Current consumption [mA] | 90; (24 V DC, 25 °C) |
| Max. current consumption [mA] | 330; (9,2 V DC; -40 °C) |
| Protection class | III |
| Reverse polarity protection | yes |
| Reverse polarity protection | yes |
| Max. initialisation time [ms] | 1000 |
| Power-on delay time [s] | 300; (warm-up time) |
| Inputs / outputs |
|---|
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 2 |
| Outputs |
|---|
| Total number of outputs | 4 |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (programmable) |
| Max. voltage drop switching output DC [V] | 2.5 |
| Permanent current rating of switching output DC [mA] | 125; (125 mA (85° C); 200 mA (60° C); 250 mA (40° C)) |
| Number of analogue outputs | 2 |
| Analogue current output [mA] | 4…20; (in case of a fault: 2 mA) |
| Max. load [Ω] | 220; (220 (9,2…15 V) / 500 (15…30 V)) |
| Analogue voltage output [V] | 2…10; (in case of a fault: 1 V) |
| Min. load resistance [Ω] | 1000; (10000 (12…13,5 V) / 1000 (13,5…30 V)) |
| Precision analogue output [%] | ≤ 1 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Measuring/setting range |
|---|
| Measuring principle | MEMS capacitive |
| Inclination measurement |
|---|
| Number of measurement axes | 2 |
| Angular range [°] | ± 180 |
| Limit frequency [Hz] | 0.5…10; (parameterisable) |
| Vibration measurement |
|---|
| Measuring range of vibration | | 16; (± 2; ± 4; ±8 g parameterisable) g | 3200 mm/s |
|
| Frequency range [Hz] | 0.1…400 |
| Number of measurement axes | X/Y/Z parameterisable |
| Accuracy / deviations |
|---|
| Accuracy [°] | ≤ ± 0,5 |
| Repeatability [°] | ≤ ± 0,1 |
| Resolution [°] | 0.05 |
| Temperature coefficient [1/K] | ≤ ± 0,02 |
| Software / programming |
|---|
| Parameter setting options | angle (X/Y) / vibration (Veff / aPeak); hysteresis / window; switch points; switching logic; fault indication; self-test; current/voltage output |
| Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 2 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 5 |
| Supported DeviceIDs | | Type of operation | DeviceID | | Default | 416 |
|
| Operating conditions |
|---|
| Ambient temperature [°C] | -40…85 |
| Storage temperature [°C] | -40…85 |
| Protection | IP 65; IP 67; IP 68; IP 69K |
| Mechanical data |
|---|
| Weight [g] | 410 |
| Dimensions [mm] | 90 x 62 x 33.2 |
| Materials | housing: diecast zinc nickel-plated |
| Displays / operating elements |
|---|
| Display | | operation | 1 x LED, green | | switch point | 1 x LED, yellow |
|
| Accessories |
|---|
| Accessories (supplied) | |
| Remarks |
|---|
| Pack quantity | 1 pcs. |
| Electrical connection – digital |
|---|
| Connector: 1 x M12 |
| Electrical connection – analogue |
|---|
| Connector: 1 x M12 |
| Other data |
|---|
| Measuring/setting range |
|---|
| inclination measurement | | | | | | | | min. | max. | | switch point | SP1 | [°] | -179.00 | 180.00 | | reset point | rP1 | [°] | -180.00 | 179.00 | | switch point | SP2 | [°] | -179.00 | 180.00 | | reset point | rP2 | [°] | -180.00 | 179.00 | | Analogue start point | ASP1 | [°] | -180.00 | 179.00 | | Analogue end point | AEP1 | [°] | -179.00 | 180.00 | | Analogue start point | ASP2 | [°] | -180.00 | 179.00 | | Analogue end point | AEP2 | [°] | -179.00 | 180.00 | | In steps of | | [°] | 0.01 | | | | | | | | vibration measurement | | | | | | | | min. | max. | | switch point | SP1 | [mm/s] | 1 | 3200 | | reset point | rP1 | [mm/s] | 0 | 3199 | | Analogue start point | ASP3 | [mm/s] | 0 | 3199 | | Analogue end point | AEP3 | [mm/s] | 1 | 3200 | | In steps of | | [mm/s] | 1 | | | | | | | | vibration measurement | | | | | | | | min. | max. | | switch point | SP2 | [mg] | 1 | 16000 | | reset point | rP2 | [mg] | 0 | 15999 | | Analogue start point | ASP4 | [mg] | 0 | 15999 | | Analogue end point | AEP4 | [mg] | 1 | 16000 | | In steps of | | [mg] | 1 | |
|
