| Product characteristics | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||||||
| Factory setting | hydrous coolants; water; media similar to water | ||||||||
| Probe length L [mm] | 264 | ||||||||
| Application | |||||||||
| Special feature | Gold-plated contacts | ||||||||
| Media | hydrous coolants; oils; oil-based media; water; media similar to water | ||||||||
| Dielectric constant of the medium | > 2 | ||||||||
| Cannot be used for | extremely conductive media; adhering media; granulates; bulk material; acids; alkali; food and electroplating industry | ||||||||
| Maximum speed of the change of level [mm/s] | 100 | ||||||||
| Tank pressure [bar] | 0.5; (when mounting with mounting accessories: E43001 – E43007, E43019) | ||||||||
| Coolants | |||||||||
| Medium temperature [°C] | 0…35; (with climatic tube E43100: 35…65 °C) | ||||||||
| Oil | |||||||||
| Medium temperature [°C] | 0…70 | ||||||||
| Medium temperature short time [°C] | 0…90; (< 1 h) | ||||||||
| Water | |||||||||
| Medium temperature [°C] | 0…35; (with climatic tube E43100: 35…65 °C) | ||||||||
| Electrical data | |||||||||
| Operating voltage [V] | 18…30 DC | ||||||||
| Current consumption [mA] | < 50 | ||||||||
| Protection class | III | ||||||||
| Reverse polarity protection | yes | ||||||||
| Power-on delay time [s] | < 3 | ||||||||
| Inputs / outputs | |||||||||
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||||||
| Outputs | |||||||||
| Total number of outputs | 2 | ||||||||
| Output signal | switching signal; analogue signal; IO-Link | ||||||||
| Electrical design | PNP/NPN | ||||||||
| Number of digital outputs | 1 | ||||||||
| Output function | normally open / normally closed; (parameterisable) | ||||||||
| Max. voltage drop switching output DC [V] | 2.5 | ||||||||
| Permanent current rating of switching output DC [mA] | 200 | ||||||||
| Number of analogue outputs | 1 | ||||||||
| Analogue current output [mA] | 4…20, invertible | ||||||||
| Max. load [Ω] | 500 | ||||||||
| Analogue voltage output [V] | 0…10, invertible | ||||||||
| Min. load resistance [Ω] | 2000 | ||||||||
| Short-circuit protection | yes | ||||||||
| Type of short-circuit protection | thermal, pulsed | ||||||||
| Overload protection | yes | ||||||||
| Measuring/setting range | |||||||||
| Factory setting | hydrous coolants; water; media similar to water | ||||||||
| Probe length L [mm] | 264 | ||||||||
| Active range A [mm] | 195 | ||||||||
| Inactive range I1 / I2 [mm] | 53 / 16 | ||||||||
| Setting range | |||||||||
| Set point SP [mm] | 25…200 | ||||||||
| Reset point rP [mm] | 20…195 | ||||||||
| In steps of [mm] | 5 | ||||||||
| Reference point OP [mm] | 69 – 82 – 94 – 106 – 118 – 130 – 143 – 155 – 167 – 179 – 191 – 204 – OFF | ||||||||
| Hysteresis, OP [mm] | 2 | ||||||||
| Accuracy / deviations | |||||||||
| Measuring error [% of the final value] | ± 5 | ||||||||
| Repeatability | ± 2 | ||||||||
| Resolution [mm] | 5 | ||||||||
| Zero signal (voltage) [V] | 0 | ||||||||
| Zero signal (current) [mA] | 4.0 | ||||||||
| Full signal (voltage) [V] | 10 | ||||||||
| Full signal (current) [mA] | 20 | ||||||||
| Software / programming | |||||||||
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current/voltage output; SP/rP position; adjustment OP; medium selection; offset setting; switch-on/switch-off delay | ||||||||
| Interfaces | |||||||||
| Communication interface | IO-Link | ||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||
| IO-Link revision | 1.1 | ||||||||
| SDCI standard | IEC 61131-9 | ||||||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||||||
| SIO mode | yes | ||||||||
| Required master port type | A | ||||||||
| Process data analogue | 2 | ||||||||
| Process data binary | 1 | ||||||||
| Min. process cycle time [ms] | 3.2 | ||||||||
| Supported DeviceIDs |
| ||||||||
| Operating conditions | |||||||||
| Ambient temperature [°C] | 0…60 | ||||||||
| Storage temperature [°C] | -25…80 | ||||||||
| Protection | IP 67 | ||||||||
| Mechanical data | |||||||||
| Weight [g] | 359.5 | ||||||||
| Dimensions [mm] | Ø 16 | ||||||||
| Materials | stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV | ||||||||
| Materials (wetted parts) | PP | ||||||||
| Displays / operating elements | |||||||||
| Display |
| ||||||||
| Remarks | |||||||||
| Notes | Please see the technical note under “Downloads” | ||||||||
| Pack quantity | 1 pcs. | ||||||||
| Electrical connection | |||||||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||||||
Cảm biến mức IFM LK3122
13.340.000 ₫
SKU: LK3122
Hãng sản xuất: IFM
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT
Khu vực Miền Nam
Call: 03826 777 45 / Chat Zalo 
Khu vực Miền Bắc
Call: 0383 167 778 / Chat Zalo
Khu vực Miền Trung
Call: 0388 895 669 / Chat Zalo
