Cảm biến lưu lượng Keyence FD-XS20E

Sensor head Rated flow range 20 L/min
SKU: FD-XS20E
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT

Báo giá
ModelFD-XS20E
Supported pipe materialsMetal pipes, Plastic pipes (soft/hard) *1
Supported fluidsLiquids (water, oil, adhesive, grease, chemical solutions, etc.) *1
Supported fluid temperature0 °C (no freezing on the pipe surface) to 100 °C 32 to 212 °F (Pipe surface temperature)
Clamp set modelPlastic pipe/tube attachmentFD-XC20R1, FD-XC20R2, FD-XC20R3, FD-XC20R4
Metal pipe attachmentFD-XC20M1, FD-XC20M2*2
Maximum rated flow rateOuter diameter of pipe 3/8 ” (9.53 mm) , ø 10 0.39 “, ø 10.5 0.41 “: 15.00 L/minOuter diameter of pipe ø 12 0.47 “, 1/2 ” (12.7 mm) , ø 13.8 0.54 “: 20.00 L/min
Zero cut flow rate0.15 L/min*3 (variable, default)
Display resolutionInstantaneous flow rate0.01/0.1 L/min (Displayed on controller)
RepeatabilityResponse time 50 ms: ±20 % of RDResponse time 500 ms: ±15 % of RD
HysteresisVariable
Display methodStatus indicator
Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529) , IP68G (JIS C0920) *4
Ambient temperature-10 to 60 °C 14 to 140 °F (No freezing)
Relative humidity35 % to 85 %RH (No condensation)
Vibration resistance10 to 55 Hz, double amplitude 1.5 mm 0.06 “, 2 hours each for X,Y,Z direction
Shock resistance50 G 11 ms 3 times each for X,Y,Z direction
MaterialSensor headHead body: PPS/PPSU, relay amplifier: PPS, cable: PVC, controller connector: PPS/PBT/POM
Clamp setFor plastic pipeBody, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7
For metal pipeMetal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7
WeightApprox. 260 g
*1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe.*2 When using stainless steel or iron pipes, the ideal pipe wall thickness is as follows, FD-XS1E: approx. 0.5 mm 0.02″, FD-XS8E: approx. 1 mm 0.04″, FD-XS20E: approx. 1 0.04″ to 2 mm 0.08″. FD-X signal strength and stability will decrease as the thickness of the pipe wall increases or decreases from the suggested size.*3 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate.*4 The connector part of the sensor head cable is IP65/IP67.

Thông tin bổ sung

Thương hiệu
Thời gian bảo hành

1 Năm

Yêu cầu tư vấn0983 995 440(Call/Zalo)

Có thể bạn thích…

Khu vực Miền Nam

Call: 0386 334 447 / Chat Zalo zalo

Khu vực Miền Bắc

Call: 0384 988 968 / Chat Zalo zalo

Khu vực Miền Trung

Call: 0374 687 899 / Chat Zalo zalo

Dịch vụ kỹ thuật/Bảo hành

Call: 0348 957 778 / Chat Zalo zalo

Email liên hệ

Dịch vụ cung ứng sản phẩm

Vì sản phẩm đa dạng, nếu Quý khách chưa tìm được. Vui lòng liên hệ để được hỗ trợ.

Tư vấn lựa chọn hoặc chuyển đổi
Nhập khẩu thiết bị theo yêu cầu

dich-vu-sua-chua-bien-tan-thiet-bi-tu-dong-hoa