| Model | KV-RC16BT | |||
| General specifications | Vibration resistance | Intermittent vibration | Frequency：5 to 9Hz | Half amplitude: 3.5 mm*1 |
| Frequency：9 to 150Hz | Acceleration: 9.8 m/s2*1 | |||
| Continuous Vibration | Frequency：5 to 9Hz | Half amplitude: 1.75 mm*1 | ||
| Frequency：9 to 150Hz | Acceleration: 4.9 m/s2*1 | |||
| Current consumption | At 11.4 V: 120 mA or less, at 26.4 V: 60 mA or less | |||
| Power voltage | Rated voltage: 12 to 24 VDC, supply voltage range: 11.4 to 26.4 VDC | |||
| Operating ambient temperature | 0 to +60°C (no freezing) | |||
| Operating ambient humidity | 10 to 95%RH(no condensation) | |||
| Ambient temperature for storage | -20 to +75°C | |||
| Approved standards | Overvoltage category | II | ||
| Pollution degree | 2 | |||
| Storage relative humidity | 10 to 95%RH(no condensation) | |||
| Approved standards | CE marking | EMI: EN55011 Class A, EMS: EN61131-2, low voltage directive: EN61131-2*2 | ||
| Operating environment | Minimal amount of dust and corrosive gas present | |||
| Altitude | 2000m or less | |||
| Approved standards | FCC | FCC Part15B class A | ||
| UL | UL :UL508 CSA :CAN／CSA22、2 No.14 | |||
| ICES | ICES-003 Issue4 | |||
| Noise immunity | 1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61131-2) | |||
| Withstand voltage | 1,500 VAC for 1 minute (between the power supply terminal and the communication terminal, between the power supply terminal and the I/O terminals, and between all the external terminals and the case) | |||
| Enclosure rating | IP2X | |||
| Insulation resistance | 100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminal) | |||
| CC-Link specifications | Supported version: 1.10, number of occupied stations: 1, station type: remote I/O station | |||
| Output specifications | transistor output | Output | Transistor output (sink type) | |
| Operating load voltage range | DC10.2 to 26.4V | |||
| Output unit external power supply | ||||
| Rated load voltage | DC12/24V | |||
| Output load current | 0.5 A/output, 5 A/unit (total)*3 | |||
| Leaked current at OFF | 0.1mA or less | |||
| Maximum decreased voltage at ON | 0.3 V (typ.) or less, 0.6 V (max.) or less | |||
| Output response time (OFF -> ON) | 0.1ms or less | |||
| Output response time (ON -> OFF) | 1.0ms or less | |||
| Insulation | Photocoupler isolation | |||
| Weight | approx 250g | |||
| *1 Conforms to JIS B 3502 IEC61131-2 Number of sweeps: 10 times respectively in the X, Y, and Z directions, 100 minutes *2 The only models that are required to support the low voltage directive are the KV-RC16BR and the KV-RC8BXR. Other I/O units are not required to support the low voltage directive. *3 For only the KV-RC8BXT, this is 4 A/unit (total). | ||||
Keyence KV-RC16BT
Khối đầu cuối đinh vít 16 điểm, Ngõ ra rơ le, có chức năng bộ lặp
SKU: KV-RC16BT
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: hóa đơn VAT
Dịch vụ kèm theo:
✓ Lập trình & Sửa chữa PLC Keyence theo yêu cầu
✓ Lắp đặt & vận hành tận nơi
✓ Hỗ trợ kỹ thuật trọn đời
✓ Lập trình & Sửa chữa PLC Keyence theo yêu cầu
✓ Lắp đặt & vận hành tận nơi
✓ Hỗ trợ kỹ thuật trọn đời
Thông tin bổ sung
| Thương hiệu | |
|---|---|
| Thời gian bảo hành | 1 Năm |
| Series | |
| Yêu cầu tư vấn | 0342 678 887(Call/Zalo) |
Khu vực Miền Nam
Call: 0345 177 768 / Chat Zalo 
Khu vực Miền Bắc
Call: 0384 988 968 / Chat Zalo
Khu vực Miền Trung
Call: 0374 687 899/ Chat Zalo
Dịch vụ kỹ thuật/Bảo hành
Call: 0348 957 778/ Chat Zalo
Email liên hệ
