Module Keyence KV-RC8BXR

Khối đầu cuối đinh vít 8 ngõ vào + 8 ngõ ra, ngõ ra rơ le, có chức năng bộ lặp
SKU: KV-RC8BXR
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: hóa đơn VAT

Dịch vụ kèm theo:
✓ Lập trình & Sửa chữa PLC Keyence theo yêu cầu
✓ Lắp đặt & vận hành tận nơi
✓ Hỗ trợ kỹ thuật trọn đời

Báo giá

Mã: KV-RC8BXR Danh mục: PLC, PLC Keyence

Mô tả
Thông tin bổ sung

Model				KV-RC8BXR
General specifications	Vibration resistance	Intermittent vibration	Frequency：5 to 9Hz	Half amplitude: 3.5 mm^*1
			Frequency：9 to 150Hz	Acceleration: 9.8 m/s²^*1
		Continuous Vibration	Frequency：5 to 9Hz	Half amplitude: 1.75 mm^*1
			Frequency：9 to 150Hz	Acceleration: 4.9 m/s²^*1
	Current consumption			At 11.4 V: 230 mA or less, at 26.4 V: 110 mA or less
	Power voltage			Rated voltage: 12 to 24 VDC, supply voltage range: 11.4 to 26.4 VDC
	Operating ambient temperature			0 to +60°C (no freezing)
	Operating ambient humidity			10 to 95%RH(no condensation)
	Ambient temperature for storage			-20 to +75°C
	Approved standards	Overvoltage category		II
		Pollution degree		2
	Storage relative humidity			10 to 95%RH(no condensation)
	Approved standards	CE marking		EMI: EN55011 Class A, EMS: EN61131-2, low voltage directive: EN61131-2^*2
	Operating environment			Minimal amount of dust and corrosive gas present
	Altitude			2000m or less
	Approved standards	FCC		FCC Part15B class A
		UL		UL :UL508CSA :CAN／CSA22、2 No.14
		ICES		ICES-003 Issue4
	Noise immunity			1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61131-2)
	Withstand voltage			1,500 VAC for 1 minute (between the power supply terminal and the communication terminal, between the power supply terminal and the I/O terminals, and between all the external terminals and the case)
	Enclosure rating			IP2X
	Insulation resistance			100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminal)
	CC-Link specifications			Supported version: 1.10, number of occupied stations: 1, station type: remote I/O station
Input specifications	24 V mode	Input maximum rating		DC26.4V
		Input voltage		DC24V approx 5.3mA
		Minimum ON voltage		19V
		Minimum ON current		–
		Maximum OFF voltage
		Maximum OFF current		2.0mA
		Input impedance		4.3 kΩ
		Insulation system		Photocoupler isolation
		Input time constant (switching method)		· 0.2 ms · 1.5 ms · 10 ms
	12 V mode	Input maximum rating		DC26.4V^*3
		Input voltage		DC12V approx 2.5mA^*3
		Minimum ON voltage		3.0V^*3
		Minimum ON current		–^*3
		Maximum OFF voltage		1.0V^*3
		Maximum OFF current		–^*3
		Input impedance		4.3 kΩ^*3
		Insulation system		Photocoupler isolation^*3
		Input time constant(switching method)		· 0.2 ms · 1.5 ms · 10 ms
	5 V mode	Input maximum rating		DC26.4V^*4
		Input voltage		DC5V approx 0.9mA^*4
		Minimum ON voltage		2.5V^*4
		Minimum ON current		–^*4
		Maximum OFF voltageｘ		0.8V^*4
		Maximum OFF current		–^*4
		Input impedance		4.3 kΩ^*4
		Insulation system		Photocoupler isolation^*4
		Input time constant(switching method)		· 0.2 ms · 1.5 ms · 10 ms
Output specifications	relay output	Rated voltage		AC240V/DC24V
		Rated output current		240 VAC, 24 VDC, 2 A/output, 4 A/common
		ON resistance		50 mΩ or less
		ON delay time		10ms or less
		Insulation		Relay isolation
		OFF delay time		10ms or less
Weight				approx 260g
^1 Conforms to JIS B 3502 IEC61131-2Number of sweeps: 10 times respectively in the X, Y, and Z directions, 100 minutes^2 The only models that are required to support the low voltage directive are the KV-RC16BR and the KV-RC8BXR. Other I/O units are not required to support the low voltage directive.^3 In 12 V mode, only the KV-RC8BXT and KV-RC16BXT are selectable.^4 In 5 V mode, only the KV-RC16BX, KV-RC32BX, and KV-RC8BXR are selectable.

Lựa chọn PLC phù hợp với Module keyence

SKU	Mô tả
CPU
KV-8000	CPU unit
KV-7300	CPU unit with built-in serial port
KV-7500	CPU unit with built-in EtherNet/IP® port
KV-1000	CPU unit with built-in serial port
KV-3000	CPU unit with built-in serial port
KV-5000	CPU unit with built-in Ethernet port
KV-5500	CPU unit with built-in EtherNet/IP® port
KV-700	CPU unit with built-in serial port
I/O unit
KV-B16RA	16-point Screw Terminal Block, Relay Output
KV-B16RC	16-point Screw Terminal Block, Relay Output
KV-B16TA	16-point Screw Terminal Block, Transistor (Sink)
KV-B16TC	16-point Screw Terminal Block, Transistor (Sink)
KV-B16TCP	16-point Screw Terminal Block, Transistor (Source)
KV-B16TD	16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection
KV-B16XA	16-point Screw Terminal Block
KV-B16XC	16-point Screw Terminal Block
KV-B8RC	8-point Screw Terminal Block, Relay Output (Independent Common)
KV-B8XTD	8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection
KV-C16XTD	16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32TA	32-point Connector Transistor (Sink)
KV-C32TC	32-point Connector Transistor (Sink)
KV-C32TCP	32-point Connector Transistor (Source)
KV-C32TD	32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32XA	32-point Connector
KV-C32XC	32-point Connector
KV-C32XTD	32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64TA	64-point Connector Transistor (Sink)
KV-C64TC	64-point Connector Transistor (Sink)
KV-C64TCP	64-point Connector Transistor (Source)
KV-C64TD	64-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64XA	64-point Connector
KV-C64XB	64-point Connector, with All Terminals Supporting 2-wire Sensors
KV-C64XC	64-point Connector
KV-SIR32XT	High speed I/O unit
I/O unit/Remote I/O unit
KV-N16ER	Expansion output unit, output 16 points, relay output, screw terminal block
KV-N16ET	Expansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N16ETP	Expansion output unit 16-output Transistor (source) output Screw terminal block
KV-N16EX	Expansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block
KV-N8ER	Expansion output unit, output 8 points, relay output, screw terminal block
KV-N8ET	Expansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N8ETP	Expansion output unit 8-output Transistor (source) output Screw terminal block
KV-N8EX	Expansion Input Unit DC Input 8 Points Type Screw Terminal Block
KV-N8EXR	Expansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points)
KV-N8EXT	Expansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points)
KV-NC16ET	Expansion Output Unit 16-output Transistor (Sink) connector type
KV-NC16ETE	Expansion output unit 16 outputs transistor (sink) output European terminal block
KV-NC16ETP	Expansion output unit 16-output Transistor (source) output Connector type
KV-NC16ETPE	Expansion output unit 16 outputs transistor (source) output European terminal block
KV-NC16EX	Expansion Input Unit 16-input switching 5V/24V DC connector type
KV-NC16EXE	Expansion input unit input 16 points European terminal block
KV-NC16EXT	Expansion I/O unit 32-point connector type 16-input, 16-output (transistor)
KV-NC32ET	Expansion Output Unit 32-output Transistor (Sink) connector type
KV-NC32ETP	Expansion output unit 32-output Transistor (source) output Connector type
KV-NC32EX	Expansion Input Unit 32-input switching 5V/24V DC connector type
KV-NC32EXT	Expansion I/O unit 32-input 32-output Transistor (sink) output Connector type
KV-NC8ER	Expansion Output Unit 8-output Relay connector type
Analog/Temperature unit
KV-AD40	A/D Conversion Unit, 4 Analog Input Channels
KV-AD40G	High-precision A/D Conversion Unit, 4 Analog Input Channels
KV-AD40V	A/D Conversion Unit, 4 Analog Input Channels
KV-AM40V	A/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels
KV-DA40	D/A Conversion Unit, 4 Analog Output Channels
KV-DA40V	D/A Conversion Unit, 4 Analog Output Channels
KV-SAD04	High-speed analogue input unit
KV-SDA04	High-speed analogue output unit
KV-TF40	PID Temperature Adjustment Unit (Multi-input 4-channel)
KV-TP40	Temperature Analog Multi-input Unit (Multi-input 4-channel)
Analog/Temperature unit/Remote I/O unit
KV-N3AM	Analog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch
KV-NC2DA	D/A conversion unit (2 points)
KV-NC4AD	A/D Conversion Unit 4-point type
KV-NC4TP	Temperature 4-input unit
Remote I/O unit
KL-16BR	16-point Screw Terminal Block, Relay Output
KL-16BT	16-point Screw Terminal Block, Transistor (Sink)
KL-16BX	16-point Screw Terminal Block
KL-16CT	16-point Connector Transistor (Sink)
KL-16CX	16-point Connector
KL-2DA	D/A Conversion Unit, 2 Analog Output Channels
KL-2TF	PID Temperature Adjustment Unit (2-channel)
KL-32CT	32-point Connector Transistor (Sink)
KL-32CX	32-point Connector
KL-4AD	A/D Conversion Unit, 4 Analog Input Channels
KL-8BLR	8-point Screw Terminal Block, Relay Output with Repeater Function
KL-8BLT	8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function
KL-8BLX	8-point Screw Terminal Block with Repeater Function
KL-8BXR	8 Input + 8 Relay Output Screw Terminal Block
KL-8BXT	8 Input + 8 Transistor (Sink) Output Screw Terminal Block
KL-B1	Joint Cable Adapter
KL-DC1A	DC Current Input Unit
KL-DC1V	DC Voltage Input Unit
KL-LC1	Load Cell Measurement Unit
KL-N20V	KL Master Unit
KL-T1	T-shaped Branch Unit
KL-WH1	Power Measurement Unit
KV-EP02	EtherNet/IP® Compatible Communication Unit
KV-RC16BR	16-point Screw Terminal Block, Relay Output, with Repeater Function
KV-RC16BT	16-point Screw Terminal Block, Transistor Output, with Repeater Function
KV-RC16BX	16-point Screw Terminal Block Input, with Repeater Function
KV-RC16BXT	16-input + 16-output Screw Terminal Block, Transistor Output
KV-RC32BT	32-point Screw Terminal Block, Transistor Output
KV-RC32BX	32-point Screw Terminal Block Input
KV-RC8BXR	8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function
KV-RC8BXT	8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function
Positioning/Motion unit
KV-H20G	2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter
KV-H20S	2-axis Pulse Train (Linear Interpolation Possible)
KV-H40S	4-axis Pulse Train (Linear Interpolation Possible)
KV-MC20V	2-axis Pulse Train Positioning Motion Unit
KV-MC40V	4-axis Pulse Train Positioning Motion Unit
KV-ML16V	16-axis ML 2-compatible Positioning Motion Unit
KV-MX1	INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card
KV-SH04PL	High-Speed Positioning Unit
KV-XH04ML	4-Axis Positioning/Motion Unit
KV-XH16ML	16-Axis Positioning/Motion Unit
Highspeed counter unit
KV-SC20V	2-channel Multi-function High-speed Counter Unit
KV-SSC02	High speed counter unit
Information/Network unit
KV-CL20	Master/Local Unit
KV-DN20	DeviceNet® Unit
KV-EP21V	EtherNet/IP® Unit
KV-FL20V	FL-net Unit
KV-L20V	Serial Communication Unit
KV-L21V	Serial Communication Unit
KV-LE20V	Ethernet Unit
KV-LE21V	Ethernet Unit
KV-LH20V	Communication Positioning Unit
KV-LM20V	High-speed Multi-link (Megalink) Unit
KV-LM21V	High-speed multi-link Unit
KV-XL202	Serial communication unit, 2 ports (RS-232C×2)
KV-XL402	Serial communication unit, 2 ports (RS-422A/485×2)
KV-XLE02	EtherNet unit, 2 ports
Power/Bus connection unit
KV-7000C	Bus Connection Unit
KV-EB1	Extension Unit
KV-N1	Conversion unit with connector unit
KV-NC1	Conversion unit with terminal block connector
KV-PU1	AC Power Supply Unit with Error Output